Custom & Geometric Windows in Fort Myers - Free In-Home Measure, Written Price

Trusted Custom & Geometric Windows for Fort Myers Homeowners

Custom and geometric windows give a Fort Myers home its character. Semicircles over a front entry, a trapezoid chasing a vaulted ceiling, a full-height octagon framing a canal view, an oversized fixed pane that turns a blank wall into a picture of the Caloosahatchee. These are not stock sizes pulled off a shelf. They are measured, engineered, fabricated, and set by people who understand that a window out of square by an eighth of an inch will leak, bind, and fail long before its time.

We are TruePane Windows & Doors, and we have built these windows for Fort Myers homeowners for over 42 years through our founder Dale Kessler’s craft tradition. Every custom and geometric window we install carries the Keystone Standard: both manufacturer warranty layers registered in writing before our truck leaves your driveway, plus our 90-Day Done Right Promise. If the pane is not true, the job is not done. Call (239) 323-5522 and a live person answers, any hour, any day.

What Our Custom & Geometric Windows Service Includes

Most window companies in Fort Myers sell rectangles. We build the windows that make a house worth looking at. Here is what falls under custom and geometric windows, and what we do differently for each.

Custom Impact Windows

A custom impact window is a shaped or oversized opening glazed with laminated impact glass certified to meet Florida Building Code for the High Velocity Hurricane Zone. Fort Myers sits in a wind-borne debris region, and a geometric window above a front door or beside a staircase is not exempt from that requirement just because it is pretty. We measure the exact opening, order the custom laminated unit with the correct structural interlayer for its size and exposure, and set it in a frame rated to match the glass. The result is a window that holds its geometry and its rating, with no foam-and-pray shortcuts around the rough opening. We pull permits when the job requires them and we stand behind the install with the same written promise as every other TruePane job.

Geometric & Shaped Windows

A geometric window is any unit that is not a rectangle: triangles, pentagons, hexagons, octagons, parallelograms, and combinations of those shapes used to fill the upper reaches of a wall or a gable. Fort Myers homes built in the 1980s and 1990s are full of these, and thirty or forty years of sun and humidity have taken their toll on the original seals and frames. We re-glaze existing geometric openings or build entirely new units, matching the angle, the sightlines, and the original trim profile where it matters. Because our technicians measure every opening twice and quote manufacturer lines side by side on paper, you see exactly what you are buying before a single cut is made.

Arched & Curved Windows

Arched and curved windows include true radius tops, half-rounds, quarter-rounds, eyebrows, and full elliptical or round units. The glass in a true curved window is bent in an oven, not cut on a curve, and the frame must be milled to match that radius precisely. We work with manufacturers who specialize in bent glass and radius frames, then set the unit so the curve reads clean from the street and from inside the room. In McGregor Boulevard’s older homes, where arched windows are part of the original architecture, we match the radius and the mullion pattern rather than boxing the opening down to a cheaper rectangle. A square deal does not mean a square window when the house calls for an arch.

Oversized Openings

An oversized opening is any rough opening larger than what a production window line covers, typically over six feet in either direction or requiring a structural header change. On a Fort Myers canal lot or a Gulf-access home in Iona, a ten-foot fixed pane facing the water is the single best improvement a homeowner can make. We engineer oversized custom units around the wind load, the exposure category, and the frame material, then install them with the same leveling discipline we bring to an eight-foot slider. Where the opening needs a new header or a steel stiffener, we coordinate that work and pull the permit so the inspection is passed, not talked around.

Brands We Service for Custom & Geometric Windows

We are an authorized installer for PGT, and we have built and set hundreds of PGT custom and geometric impact units in Fort Myers, Cape Coral, and Lehigh Acres. PGT’s WinGuard and custom shape lines give us consistent, code-rated glass and frames for shaped openings, and we register both warranty layers on every install before we leave the driveway. When a homeowner calls us about a failed PGT radius unit, we know the product line well enough to quote the replacement accurately the first time.

We also work with Mr-Glass and ViewLux for non-impact custom shapes and decorative glass where the opening is protected from wind-borne debris by geography or by code. Mr-Glass gives us access to specialty bent and decorative units for arched transoms and accent windows, while ViewLux covers laminated and tempered custom shapes for interior and protected exterior applications. Whether you have one of these brands or something else entirely, we can service it. We service more than a dozen manufacturer lines total, including Andersen, Pella, Marvin, Milgard, Jeld-Wen, and CGI, and we quote them side by side on paper so you can see the differences in writing.

Signs You Need Custom & Geometric Windows Right Now

Custom and geometric windows fail the same way any other window fails, but their failures are easier to miss because they sit high, they are hard to reach, and nobody looks at them until water shows up on the floor below.

• Condensation between the panes of a shaped window. A fogged triangle or half-round over your entry is a failed seal. The insulating gas has escaped, the glass can no longer do its job, and the only real fix is replacement of the insulated unit or the entire window. You cannot repair a failed seal from the outside, no matter what a handyman says.
• Visible water staining on drywall or trim below a geometric window. Water follows the frame and the rough opening before it shows up as a stain. By the time you see the stain, the leak has been working for months, and the framing around the opening may already be compromised. In Fort Myers humidity, that wet wood goes to rot and mold fast.
• Cracked or chipped glass in a shaped or curved unit. A crack in a flat pane is a problem. A crack in a bent or shaped pane is worse because the glass cannot be cut and replaced on site; the entire unit must be ordered to match the radius or the angle. The longer you wait, the more the crack spreads and the more exposure the opening takes.
• An arched or geometric window that will not open, or binds and sticks when it does. Shaped operable windows, especially casement-style arches and transoms, carry their own hardware loads. When the crank binds or the sash sags, the frame has shifted or the hardware has worn. Forcing it open warps the sash and makes a repair into a replacement.
• Gaps, daylight, or drafts around a shaped window frame. If you can see daylight through the joint where the drywall meets the frame, the window was set out of true or the rough opening has moved. Caulk will not fix a gap you can see through. The unit needs to be pulled, shimmed square, and re-set, and the sooner that happens the less water and salt air get into the wall cavity.

Our Custom & Geometric Windows Process - Step by Step

Custom and geometric window work follows the same discipline on a ten-foot radius as it does on a standard bedroom sash. Here is how a TruePane job runs.

Step 1: You call. A live person answers.

Call (239) 323-5522 and you will speak to a person, not a phone tree. We take down the address, the problem, and a rough description of the window in question. If it is an emergency, like a shattered impact unit after a storm or a leak that is actively damaging a room, we get a technician out the same day. There is no callback form and no regional call center.

Step 2: We measure. Twice.

A TruePane technician arrives in uniform, on time, with the tools for the job. Every opening is measured twice, and for geometric and arched units we take a physical template of the opening, not just width and height numbers. Radius, angle, and mullion placement go onto the template. That template is the difference between a window that drops into the rough opening and a window that has to be made to fit because the first measurement was wrong.

Step 3: You get a written, line-item quote.

We quote manufacturer lines side by side on paper. You see the window cost, the frame cost, the installation labor, the permit if one is required, and the warranty registration. Nothing is verbal and nothing is estimated. The price on the quote is the price on the bill. No change orders, no surprise line items. If you are a senior or a veteran, the permanent 5% discount comes off that written quote, and if your repair is over $250, the $50 repair credit applies.

Step 4: We build and set the window.

A custom or geometric unit is fabricated to the template we took, then set in your opening by the same technician who measured it. We shim to level and square, we flash per manufacturer spec and Florida code, we set the glass, and we check the operation. For impact-rated custom windows, we verify the structural rating and the anchoring before final trim goes on. Most jobs are completed in a single visit.

Step 5: We register both warranty layers. In writing. Before we leave.

Before the truck leaves your driveway, we register both the manufacturer warranty layers and our 90-Day Done Right Promise in writing and hand you the paperwork. Durations are stated, no fine print, nothing to argue about later. If something is not done right within 90 days, we make it right. No paperwork fights, no phone tag, no arguing.

How Much Does Custom & Geometric Windows Cost in Fort Myers?

Custom & Geometric Windows Near Fort Myers - Our Service Area

TruePane Windows & Doors serves Fort Myers and the surrounding communities, including Cape Coral, Lehigh Acres, North Fort Myers, Estero, Bonita Springs, Fort Myers Beach, Sanibel, San Carlos Park, Punta Gorda, Port Charlotte, and Cypress Lake. If you are in Cape Coral and want to compare how we handle Custom & Geometric Windows in Cape Coral, the page covers canal-front homes and the specific wind exposure challenges on the Cape. For the Lehigh Acres area, Custom & Geometric Windows in Lehigh Acres goes into detail on the inland market. And if you are exploring larger work beyond shaped windows, start with our home page for the full range of TruePane services.

Frequently Asked Questions - Custom & Geometric Windows in Fort Myers

What is a custom and geometric window?

A custom and geometric window is any window built to a non-standard shape, size, or specification. That includes triangles, pentagons, hexagons, octagons, arches, half-rounds, quarter-rounds, eyebrows, ovals, circles, and oversized fixed panes that exceed standard production sizes. TruePane measures, templates, orders, and installs these windows for Fort Myers homeowners, and registers both warranty layers in writing on every job.

How long does custom and geometric window installation take?

Most custom and geometric window replacements we handle are completed in a single visit. A standard shaped unit, like a triangular fixed window or a half-round transom, takes a day from removal to set to trim. An oversized custom impact window with a structural header may take two to three days depending on the framing scope and the permit inspection schedule. We will give you a real schedule on your written quote, and we will be there when we say.

How much does a custom or geometric window cost in Fort Myers?

A fixed geometric window in Fort Myers typically runs $850 to $3,200 installed, with arched and curved windows falling between $1,200 and $2,600, and custom impact units starting around $1,800 and going up based on size and glazing. Oversized panes with structural work run $2,500 to $5,500 or more, and full-room packages start around $6,000. Call (239) 323-5522 for a free written estimate with real line items, not a verbal range.

Do you service PGT custom and geometric windows?

Yes. We are an authorized PGT installer, and we have set hundreds of PGT custom and geometric impact windows across Fort Myers, Cape Coral, and Lehigh Acres. We also service Mr-Glass, ViewLux, Andersen, Pella, Marvin, Milgard, Jeld-Wen, CGI, and ES Windows, and we quote manufacturer lines side by side on paper so you can see exactly what you are buying.

What if my custom window breaks during a storm and I need help right away?

A shattered impact unit is an emergency, and we treat it that way. A live person answers (239) 323-5522 at any hour, every day of the week. We dispatch a technician the same day to secure the opening and begin the replacement process, and we pull permits and register warranties as the job requires. You will never talk to a voicemail tree when water is coming through an opening.

What warranty covers a TruePane custom or geometric window install?

Every TruePane job carries the Keystone Standard: both manufacturer warranty layers registered in writing before our truck leaves the driveway, with durations stated in plain language. On top of that, our 90-Day Done Right Promise covers our workmanship for 90 days with no paperwork fights and no arguing. If the pane is not true, the job is not done, and we make it right.

How should I prepare my home for custom window installation?

Clear the area around the window, move furniture and wall decor at least six feet from the opening, and let your neighbors know if the unit is large enough that our crew will be working from the exterior. For second-story and high geometric windows, remove anything fragile from the wall beneath the opening. We handle the rest, including protecting the floor and the work path, and we leave the area clean.

Schedule Your Custom & Geometric Windows Service in Fort Myers Today

A shaped window is the first thing a visitor notices about your house, and the first thing that shows its age when the seal fails or the frame sags. Whether you need one half-round replaced or an entire wall of geometric glass built from a blank opening, TruePane has the craft, the warranties, and over 42 years of standing behind the work. Call (239) 323-5522 for a free, no-obligation estimate. A live person will answer, and the quote will be in writing.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Myers since 2008.