Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI
Before
After
Before
After
Before
AfterFast, Reliable Custom & Geometric Windows Across Lehigh Acres
Custom and geometric window work in Lehigh Acres usually means one of two things: an older CBS home with a jalousie opening that matches no modern impact window made today, or a 2000s tract house where the builder-grade trapezoid over the entry has fogged and the seal has gone flat. Either way, the job is a code-compliance, insurance, and water-management problem, not just a glass swap. TruePane Windows & Doors has been running crews through Lehigh Acres long enough to know which openings will bite you. Call (239) 323-5522 and a live person answers, any hour, any day.
We measure twice. We quote on paper. And we’ll be there when we say.
Why TruePane Windows & Doors Is Lehigh Acres’s Preferred Custom & Geometric Windows Company
Dale Kessler founded this company in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That rule shapes how our crews work a Lehigh Acres job, because this town’s housing stock is different from the coastal cities. Most homes off Homestead Road, Richmond Avenue, and Joel Boulevard are 1960s through 1980s concrete block, built when jalousie windows were standard and impact glazing was an afterthought. Our technicians have cut, infilled, and reframed enough of those openings to know the wall before they pull the old sash.
We’re not the cheapest bid in Lehigh Acres, and we won’t pretend to be. We are the last call a homeowner needs to make after a cut-rate install has leaked, fogged, or failed a wind-mitigation inspection. Every job carries our 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. No arguing later.
Our Custom & Geometric Windows Services in Lehigh Acres
Our Custom & Geometric Windows team handles the shapes that stock windows don’t: radius tops, half-rounds, trapezoids, octagons, triangles, angled flankers, and oversized fixed walls. In Lehigh Acres, almost none of these are plug-and-play. The opening in a 1972 CBS wall is rarely square and almost never matches a modern impact-rated frame’s nominal sizing. We plan for that before the first cut.
Custom Impact Windows
Lehigh Acres sits inside Florida’s wind-borne debris region, which means every replacement opening must carry impact-rated glazing or an approved secondary shutter system. For older CBS homes, that usually means a custom impact window engineered around a non-standard block opening. We specify PGT and CGI units with laminated glass interlayers and design pressure ratings matched to the opening, then flash and seal the jamb so water never gets behind the stucco again.
Geometric & Shaped Windows
Triangles, trapezoids, and angled picture units over entryways are common in Lehigh Acres’s 2000s boom-era homes, and they fail on a schedule. The interior heat index pushes past 105°F most summers, softening vinyl and breaking corner welds. A lifted weld drops the design pressure rating below what Lee County requires. We replace those units with frames that hold their shape, using hot-dip galvanized or stainless hardware that won’t corrode in the salt air that reaches inland.
Arched & Curved Windows
True half-rounds and radius units over front doors or living-room windows are the hardest openings in a Lehigh Acres home. Original arched windows in 1960s CBS construction were often single-pane aluminum set directly into block, with no manufacturer on record and no replacement part available. Our crews cut the block for a true radius, order a custom bent or radius unit, and install it so the water that has been rotting the stucco stops on day one. A custom PGT radius unit with a Low-E insulated glass unit and laminated interlayer is our standard recommendation for these openings.
Oversized Openings
Large fixed picture windows and full-wall glazing systems carry higher design pressures, especially on a Lehigh Acres home with an open, west-facing exposure. The engineering does not scale linearly: a 6-foot-by-8-foot impact window is a different animal than a 4-foot-by-4-foot one. We handle the blocking, the load path, and the structural anchoring so the frame stays true in a storm, not just on the day we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lehigh Acres
TruePane is an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, PGT, CGI, and ES Windows. For Lehigh Acres custom and geometric work, we most often specify PGT, CGI, and ViewLux, because those lines carry the Florida Product Approval configurations and design pressure ratings this wind zone demands. We quote side by side on paper so you see exactly what you are buying, and we keep local stock and ordering channels warm for Lehigh Acres customers so custom fabrication moves as fast as the plant allows.
Common Custom & Geometric Windows Problems We See in Lehigh Acres Homes
- Jalousie openings that match no modern window. The 1960s and 1970s CBS stock off Homestead Road and Richmond Avenue was built with jalousie units set directly into concrete block. The rough openings are non-standard, so a code-compliant impact window requires either block infill or a custom-milled frame. Crews coming from Cape Coral or Estero sometimes miss this until demo day.
- Salt-air corrosion on conversion hardware. Lehigh Acres sits 15 to 20 miles inland, but the Gulf’s salt still rides the air far enough to eat uncoated aluminum frames and cheap steel screws within five years. We never hang a custom geometric sash on anything less than hot-dip galvanized or stainless hardware.
- Corner-weld failures on arched and trapezoid vinyl. The inland heat index regularly exceeds 105°F in summer. Builder-grade vinyl on a 2005 tract home’s trapezoid window will soften, warp, and break the corner welds. That failure drops the design pressure below the wind-borne debris requirement, and most owners don’t know until a wind-mitigation inspection flags it.
- Fogged seals and shifted rough openings after foreclosure cycles. Many 2000s-boom homes in Lehigh Acres sat vacant for years through foreclosures. No maintenance means flattened weatherstripping, failed insulated glass seals, and block openings that shifted without anyone noticing. By the time a new owner calls, the window is leaking and the frame is fighting the wall.
Pricing for Custom & Geometric Windows in Lehigh Acres, FL
A straightforward custom impact window in Lehigh Acres runs $800 to $1,500 per opening installed. A geometric or trapezoid shape with non-standard angles runs higher, typically $2,500 to $5,000 per unit once you factor in the custom frame, structural blocking, and the additional labor a non-square opening requires. A whole-home package with multiple custom shapes and oversized units generally lands between $8,000 and $25,000 or more, depending on opening count, floor height, and wind-zone engineering. The single largest cost variable in Lehigh Acres is whether the original opening is CBS block and needs infill work. That is not a hidden fee, it’s line-item work we show you before you sign. Call (239) 323-5522 for a free in-home measure and a written quote.
What Custom & Geometric Windows Costs in Lehigh Acres
Impact windows generally run $800 to $1,500 per window installed across Lehigh Acres. Impact single-hungs fall between $900 and $1,800. Large or custom openings like trapezoids, half-rounds, or oversized picture walls run $2,500 to $5,000 per unit. Whole-home packages of custom and geometric impact windows start around $8,000 and climb past $25,000 for extensive work with multiple non-rectangular openings. What moves the price in Lehigh Acres specifically: the opening count, the wind zone requirements under the Florida Building Code, the floor height (second-story openings need more handling and anchoring), and the frame material. A 1968 CBS home with six jalousie openings and an arched front picture window costs more than a 2005 tract home with three standard doubles, and that gap is real. We give you a free in-home measure and a written line-item quote so the number on paper is the number on the bill.
Florida Pays You Back
Lehigh Acres homeowners can stack several programs to offset the cost of custom impact windows. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, contingent on program funding and eligibility. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit covers 30% of the product cost, up to $600 per year on qualifying units. And most carriers offer windstorm-premium credits averaging around 25% on the windstorm portion of your policy after a wind-mitigation inspection, which typically costs $75 to $150. The programs and carriers set the final numbers, and we won’t promise a rebate we cannot put in writing. We will tell you exactly which documents you need to file.
We Also Serve Cities Near Lehigh Acres
Our crews work Lehigh Acres daily and also serve Fort Myers, Estero, North Fort Myers, and Cape Coral. Dispatch and scheduling are coordinated from our South Florida office, but the technicians on your job live and work in this market. We don’t fly crews in from another region, and we don’t treat Lehigh Acres as a satellite. The same background-checked, uniformed technicians handle your measure, your install, and any callback under the 90-Day Done Right Promise.
Serving Lehigh Acres, FL - Our Local Coverage Area
We’re based in the Lehigh Acres area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom & Geometric Windows in Lehigh Acres
Yes, provided the unit carries a Florida Product Approval or Miami-Dade NOA configuration rated for your opening’s design pressure, which our team specifies before ordering. A 1968 CBS home in Lehigh Acres falls squarely inside Florida’s wind-borne debris region, so every replacement opening must carry impact-rated glazing or an approved shutter system. We engineer each custom shape to the wall’s actual dimensions and the code’s actual numbers, not a generic wind-speed sticker. Call (239) 323-5522 and we’ll tell you what your specific opening needs.
Because the 1960s and 1970s CBS homes in Lehigh Acres have jalousie and arched openings set directly into concrete block with non-standard rough dimensions, so almost every custom shape requires block infill work, a custom-milled frame, or both. Newer coastal construction in Cape Coral and Estero was built around modern nominal window sizes, so a stock impact unit often drops in with little modification. Lehigh’s older stock adds a half-day to a day of masonry and framing labor per opening, and that labor is real. We show it as a line item on your written quote, not as a surprise on the final bill.
It depends entirely on your insurance carrier and the specific shutter or film system’s product approval. Some carriers accept qualified shutter systems; many no longer do after the post-Ian underwriting pullback in Lee County. We do not sell or install hurricane shutters. If your policy requires impact-rated glazing on every opening, film and improvised shutters won’t satisfy the wind-mitigation form. Get your carrier’s requirements in writing, then call (239) 323-5522 for a quote on the glazing that will actually pass.
Look for fog between the panes, visible corner-weld cracks on trapezoid or arched frames, daylight at the weatherstripping, or a chalky white oxidation on aluminum tracks. In Lehigh Acres, 2000s boom-era homes sat unmaintained through foreclosure cycles, and seals that should last twenty years often failed in ten. If you can push a dollar bill through the gap between sash and frame, the window is no longer meeting its design pressure. We’ll check every opening during the free measure and tell you which ones are already gone.
Custom fabrication for non-rectangular shapes typically runs four to six weeks from order to delivery, and the clock starts after we measure, engineer, and approve the drawing. Once your units arrive from the manufacturer, installation is often completed in as fast as a single day. The lead time is set by the glass plant, not by us, and we won’t promise a faster fabrication than the plant can deliver. If your insurance deadline is bearing down, call (239) 323-5522 and we will get the order in the queue the same day.
Contact TruePane Windows & Doors in Lehigh Acres
If you need custom or geometric impact windows in Lehigh Acres, call (239) 323-5522. A live person answers, 24 hours a day, 7 days a week. We’ll schedule a free in-home measure, walk the openings with you, and hand you a written line-item quote with both warranty layers registered in writing before the truck leaves your driveway. That’s the square deal, and that’s how we’ve done it for over 42 years.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lehigh Acres and surrounding Lee County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.