Arched & Curved Windows in Fort Myers, FL

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

CGI

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Arched & Curved Windows in Fort Myers, FL

Arched and curved windows are specialty units – fanlights, full-radius tops, elliptical transoms, eyebrow shapes – that require our Custom & Geometric Windows services for custom fabrication and field-fit installation because no two openings measure exactly the same. In Fort Myers, we fit and install these windows for existing homes that already have arched rough openings, for new additions where the architect called for a curved unit, and for homeowners who simply want to restore a fogged or cracked arch window without losing the character of the original frame. If you have one of these openings and the glass has gone bad – or the unit was never quite right from the day it was installed – call us at (239) 323-5522. A live person picks up every call, seven days a week.

As part of our broader Custom & Geometric Windows in Fort Myers work, arched and curved units are probably the most exacting thing we do. The math on a true radius arch has to be correct before a single piece of glass is cut, and the frame has to sit plumb and square in an opening that – by definition – is not rectangular. Dale Kessler has been doing this kind of work since before most window companies in Lee County existed, and TruePane has served Fort Myers homeowners for over 42 years through a craft tradition that does not accept “close enough” on a curved unit.

When You Need Arched & Curved Windows

• The glass is fogged or has a visible break. Thermal seal failure in a curved insulated unit is common in Fort Myers’s humidity – once moisture gets between the panes, the condensation does not clear on its own. A fogged arch over a front door or in a great room is both a visual problem and an energy loss you are paying for every month on your FPL bill.
• The frame has pulled away from the rough opening. Southwest Florida’s soil movement and wood-frame construction settle differently than other regions. An arch window that was installed even slightly out of round can open a gap at the spring line – the point where the arch meets the straight leg – letting conditioned air out and humid air in.
• You are replacing the windows on a home with original arched openings. Older Fort Myers neighborhoods – parts of McGregor Boulevard, Coconut Road, and sections of the historic district near downtown – have homes built in the 1960s through 1980s with architectural arch windows that cannot simply be swapped for a rectangular unit without losing the look the house was built for.
• A storm damaged one unit in a matched set. Replacing a single arch window in a row of matching units means the new glass has to match the profile, the grille pattern, and the tint of the surviving units. We source from manufacturer lines – including PGT and CGI – that can match radius, glass package, and hardware finish on a single replacement unit.
• The existing unit is impact-rated but the seal has failed. Many Fort Myers homes had impact arches installed after the 2004-2005 hurricane seasons. Those units are now old enough that seals are failing and hardware is wearing. Replacing the glass package in an existing impact frame – rather than the whole unit – is sometimes the right call, and we can tell you honestly which approach fits your situation.
• You are adding a room or dormer and need a custom arch built to spec. New construction additions in Fort Myers frequently call for a curved or arched window that does not exist off a manufacturer’s standard shelf. We work directly with fabricators to build to your architect’s drawing, then install it to manufacturer spec so the warranty is valid from day one.

Our Arched & Curved Windows Process

1. Field measurement – radius, chord, and rise. We start with physical measurements of the actual rough opening, not the old frame. On a true arch, that means documenting the radius, the chord width at the spring line, and the rise height to the crown. We take these measurements twice. If the opening is not what the original permit drawings show – which happens more often than you’d expect in homes that have been through one or two Florida renovation cycles – we catch it before anything is ordered.
2. Side-by-side manufacturer quotes on paper. For a custom arch in Fort Myers, we will typically quote two or three manufacturer lines that can produce the unit – which may include PGT for impact-rated work, CGI for high-wind coastal specs, or other lines depending on the opening. You see the numbers side by side, with glass package, frame color, and warranty duration written out. No verbal estimates that grow when the invoice arrives.
3. Factory order with confirmed lead time. Custom arched windows are not stock units. We give you a confirmed lead time in writing when the order is placed. For most residential arches in the Fort Myers market, that runs four to ten weeks depending on the manufacturer and glass specification. We stay in contact during that window so you are not wondering where things stand.
4. Prep and dry-fit before the old unit comes out. On installation day, our crew dry-fits the new unit in the opening before the existing window is removed. If the radius is off by even a small fraction, we address it before there is an open hole in the wall. This step adds time; it also prevents the kind of emergency foam-and-caulk fixes that look bad and fail within a season in Fort Myers’s heat and UV exposure.
5. Installation to manufacturer spec and local code. Fort Myers and Lee County have specific wind-load requirements that govern how arched windows must be anchored – particularly for impact-rated units. We follow manufacturer installation instructions to the letter because the warranty requires it, and we pull any required permit so your installation is on record. That matters when you sell the house.
6. Warranty registration before the truck leaves. Under The Keystone Standard, both manufacturer warranty layers – product and glass – are registered in writing before we leave the driveway. You get a copy with durations stated. Combined with our 90-Day Done Right Promise, if anything about the installation is not right in the first ninety days, we come back and make it right – no paperwork fight, no arguing about whose responsibility it is.

Arched & Curved Windows Pricing in Fort Myers

Arched and curved windows cost more than rectangular units of comparable size, and the honest reason is labor and fabrication for Geometric & Shaped Windows: the glass has to be cut to a specific radius, the frame is not a standard extrusion, and the installation requires more prep time to fit correctly. In the Fort Myers market, here is what we typically see:

Several things move the number on any given job. Custom Impact Windows add cost, but in Fort Myers they are often required by code and always worth it for a unit that faces prevailing storm direction. Low-E coatings that block the southwest Florida solar heat load – which runs hard from April through October – pay back in energy savings over time and are worth discussing before the order goes in. Frame material, grille pattern, and interior color all affect fabrication cost. And if the rough opening needs structural correction before the new unit fits properly, that is additional work we quote separately and honestly before we touch anything.

We offer $50 off any repair over $250, a 5% permanent discount for seniors and veterans, and free estimates on all new installations. Call (239) 323-5522 and we will schedule a measure appointment – no obligation, and the quote you get is the price on the invoice.

What Sets TruePane Apart on Arched Windows

Most window contractors in Fort Myers will install a standard rectangular unit without hesitation. Arched and curved work is different. The margin for error is smaller, the fabrication lead time is longer, and an install that is slightly out of round will show – either as a visible gap at the spring line, a binding frame, or a seal that fails prematurely because the glass is under uneven stress.

Dale Kessler built TruePane on one rule: if the pane is not true, the job is not done. That rule matters more on a curved unit than anywhere else we work. We have been doing this kind of installation in Fort Myers for over four decades, which means we have also seen what happens when it is done badly – fogged arches replaced every five years because the frame was never set true, or impact units that failed their first hurricane season because the anchorage did not meet code.

We are an authorized installer for more than a dozen manufacturer lines, which matters because it means the factory warranty is valid and registered. A homeowner who bought an arch window from a contractor who was not an authorized installer for that manufacturer has a product warranty that may not be honored – and no workmanship guarantee behind it. With TruePane, both layers are registered in writing before we leave, and our 90-Day Done Right Promise covers the installation itself.

Our technicians are background-checked and uniformed. They work in a customer’s home the way they would work in their own mother’s house. They measure every opening twice. They quote manufacturer lines side by side on paper. And they do not leave until the window is true and the paperwork is in your hands.

Arched Windows and Fort Myers’s Climate

Fort Myers sits at roughly 26 degrees north latitude, which means solar angle is steep for most of the year and UV exposure is relentless. A curved or arched window installed on the south or west face of a home – common in the McGregor corridor and in Cape Coral homes that face the Caloosahatchee – takes a disproportionate amount of direct sun. Standard clear glass in these locations will heat a room significantly and fade interior finishes faster than homeowners expect.

Low-E glass coatings are worth the upfront cost on south- and west-facing arches in Fort Myers. We also recommend laminated impact glass on any arch that is within the structural envelope, not because it is required in every case, but because it adds UV blocking and eliminates the need for a secondary protection plan when a storm is three days out. For a fixed arch window – which cannot be shuttered the way an operable unit can – that consideration is practical, not just code-driven.

Fort Myers’s salt air also affects frame material over time. Aluminum frames that are not properly coated or thermally broken will conduct heat and corrode faster in a coastal environment. We walk homeowners through frame material options – aluminum, vinyl, fiberglass, or composite – and explain the tradeoffs honestly before the order is placed.

FAQs – Arched & Curved Windows

Can you replace just the glass in an arched window without replacing the whole frame?

Yes, in many cases you can replace only the insulated glass unit inside an existing arch frame, and it is usually less expensive than replacing the whole window. The key question is whether the existing frame is structurally sound and still set true in the opening. If the frame has shifted, corroded, or lost its shape, replacing glass into a bad frame is money spent twice. We assess the frame condition as part of any free estimate – if the frame is good, we will tell you so and price the glass-only option. Call (239) 323-5522 to schedule a look.

How long does it take to get a custom arched window in Fort Myers?

Most custom arched windows in the Fort Myers market take four to ten weeks from confirmed order to delivery, depending on the manufacturer line and glass specification. Impact-rated units with specialty coatings sometimes run toward the longer end of that range. We give you a confirmed lead time in writing when the order is placed – not an estimate that grows later. Installation itself is typically a single-day visit once the unit arrives. For an urgent situation, call us and we will check what each manufacturer line can actually deliver right now.

Do arched windows in Fort Myers need to be impact-rated?

It depends on the location of the window in the structure, the age of the home, and the specific wind-load zone for your address. Fort Myers is in a High-Velocity Hurricane Zone area, and Lee County building code requires impact-rated glazing or an approved secondary protection system for most openings in new installations or permitted replacements. Fixed arch windows are often difficult to shutter effectively, which makes impact glass the practical choice even when a homeowner might otherwise have options. We pull the permit and spec the glass to code – you will know exactly what is required and why before anything is ordered.

What does an arched window replacement cost in Fort Myers?

Installed cost for a mid-size residential arch window in Fort Myers typically runs between $900 and $1,800 for a standard-to-impact insulated unit. Smaller fanlights and transoms can come in under $900; Oversized Openings and large elliptical or custom multi-unit installations can run $3,500 and above. Glass-only replacement in a sound existing frame often falls between $300 and $850. The number depends on size, glass package, frame material, and whether the rough opening needs any correction before the new unit fits true. Call (239) 323-5522 for a free, no-obligation estimate – the quote we give you is the number on the invoice.

Key Takeaways

• Arched and curved windows require custom fabrication and precise field measurement – a fraction off on the radius shows in the finished install.
• In Fort Myers, impact-rated glass is often required by code and always worth considering for fixed units that cannot be shuttered.
• Glass-only replacement in an existing sound frame is a legitimate, lower-cost option – we will tell you honestly whether the frame qualifies.
• Lead times run four to ten weeks for most custom units; we confirm yours in writing at order placement.
• Both manufacturer warranty layers are registered in writing before TruePane leaves the driveway, backed by a 90-Day Done Right Promise on the installation.
• Seniors and veterans receive a permanent 5% discount; $50 off any repair over $250 is a standing offer.
• Call (239) 323-5522 – a live person answers every call, every day of the week.

Ready to Talk About Your Arched Windows?

If you have an arch or curved window in Fort Myers that is fogged, cracked, pulling from the frame, or simply never installed correctly in the first place, call TruePane Windows & Doors at (239) 323-5522. We will schedule a free estimate at a time that works for you, measure the opening properly, and give you a written quote with manufacturer options side by side. No pressure, no inflated numbers, and no surprises when the invoice arrives. That is how TruePane has operated since Dale Kessler founded the company – and it is not changing. From our home base in Fort Myers, we have been serving this community for over 42 years, and we plan to be here long after this job is done.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Myers.