Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI
Before
After
Before
After
Before
AfterCustom Impact Windows in Fort Myers, FL
Custom impact windows in Fort Myers are engineered to meet Florida Building Code wind-load requirements while fitting openings that standard catalog sizes simply cannot cover. Most installations are completed in a single visit, and every job leaves with both manufacturer warranty layers registered in writing before our truck pulls out of your driveway. If you have an opening that is arched, oversized, angled, or otherwise outside the range of stock sizing, call us at (239) 323-5522 – a live person answers around the clock.
TruePane Windows & Doors has been doing this work in Fort Myers since Dale Kessler founded the company in 2008, carrying forward a glazier’s tradition that goes back two generations. When a window needs to be both impact-rated and built to a non-standard dimension, the margin for error is essentially zero – a frame that is off by a fraction of an inch can compromise the product’s impact certification and void the warranty. That is exactly the kind of problem Dale built TruePane to prevent.
This page lives under our Custom & Geometric Windows in Fort Myers service, which covers the full range of specialty shapes and configurations we handle. Custom impact windows are the most technically demanding work in that category, and they deserve their own conversation.
When You Need Custom Impact Windows
- Your opening is an odd dimension. Older Fort Myers homes – particularly those built in the McGregor corridor and the Palmlee Park area during the 1960s and 1970s – frequently have rough openings that fall between standard sizes. A catalog window that is slightly too narrow gets shimmed; a custom impact window is ordered to the fraction and seals correctly from day one.
- You have an arched, radius, or geometric shape. A half-round transom above a front entry or an angled picture window in a great room cannot be replaced with a rectangular stock unit. The glass, the frame, and the impact laminate all have to be fabricated to match the original geometry – or improve on it.
- Your existing windows failed during a storm event. Lee County saw sustained winds above 100 mph during Ian, and homes with non-impact or improperly installed windows paid the price. If your current windows are original to the house or were never certified to current Florida Building Code standards, custom impact replacement is the right conversation to have now rather than during the next named storm.
- You are renovating a room with a new or modified opening. Additions, converted screened enclosures, and bump-outs in the Cape Coral and Iona areas regularly require openings that were drawn to the architect’s dimensions, not a manufacturer’s catalog. A custom-fabricated impact unit is the only solution that keeps you code-compliant and covered under warranty.
- You need multiple units to match an existing sight line. If you are replacing one window in a bank of three, a stock window almost never matches the sight-line height or frame profile of the others. Custom fabrication lets us match the profile, the glass height, and the frame color so the finished elevation looks like it was planned that way – because it was.
- Your home is in a flood zone or coastal high-hazard area. Homes along the Fort Myers Beach shoreline and the Sanibel causeway approach face product-approval requirements that are stricter than the base state code. Custom impact units from manufacturers like PGT or CGI carry the product approvals needed for those locations; a standard replacement window does not.
Our Custom Impact Windows Process
- Field measure – every opening, twice. One of our background-checked, uniformed technicians comes to your home and measures every rough opening independently on two passes. We record the dimensions, document the existing frame condition, check the sill for level, and note anything that could affect the new unit’s installation – rot in the buck, out-of-plumb jambs, stucco cracking at the corners. Nothing is estimated from a photograph or assumed from a floor plan.
- Side-by-side manufacturer quotes on paper. We are authorized installers for PGT, CGI, and other impact-rated lines, and we lay the options out on paper so you can see what you are buying. Glass package, frame color, hardware finish, impact rating, Low-E coating, and the full warranty duration for each manufacturer layer – on paper, side by side, before you decide anything. Dale started doing it this way because he was tired of homeowners being surprised by what they actually got versus what they thought they ordered.
- Permit pull and product-approval verification. Fort Myers and unincorporated Lee County both require a building permit for impact window replacement, and the permit application has to reference the product’s Florida Product Approval (FPA) number. We handle the permit pull. We verify that the custom unit’s fabricated dimensions fall within the tested and approved size range on the FPA listing – because a custom window that falls outside that range is not legally impact-rated, regardless of what the glass itself can withstand.
- Factory fabrication and delivery coordination. Custom units are ordered directly from the manufacturer to the confirmed field measurements. Lead times vary by manufacturer and glass package – we give you a realistic window and call you when the product is confirmed for delivery, not the week it is supposed to arrive.
- Installation – square, level, plumb, and flashed. Our crews set the frame to the sill, shim to level and plumb, apply the appropriate sealant and flashing per the Florida Building Code installation instructions, and torque the fasteners to spec. If the pane is not true, the job is not done – that is not marketing copy, it is the standard Dale put on the whiteboard in 2008 and has never taken down.
- Warranty registration before we leave. Both manufacturer warranty layers – product and glass – are registered in writing before the truck leaves your driveway. You get the paperwork. You know the durations. The 90-Day Done Right Promise covers our workmanship on top of that. If something is not right, you call the same number, a live person picks up, and we make it right. No arguing, no fine print hunting.
Custom Impact Windows Pricing in Fort Myers
Custom impact windows in Fort Myers typically run between $850 and $2,400 per unit installed, depending on the factors below. That range is honest – not a bait price that climbs once the permit and flashing are added, and not a ceiling that leaves room for a shock on the final invoice. Our pricing is upfront before any work is authorized.
| Factor | Lower End | Higher End |
|---|---|---|
| Window size | Smaller openings under 20 sq ft | Large or oversized openings above 35 sq ft |
| Glass package | Standard impact laminate, clear | Low-E, tinted, or laminated insulating glass |
| Shape complexity | Rectangular, single-dimension custom | Arched, radius, trapezoid, or compound geometry |
| Frame condition | Sound buck, no rot or reframing needed | Rotted sill, out-of-plumb jambs, stucco repair required |
| Manufacturer line | PGT WinGuard entry-level configurations | CGI Series 600 or premium multi-chamber frames |
| Permit and inspection fees | Single unit, straightforward permit | Multiple units, special inspector required |
A few things worth saying plainly about Fort Myers pricing specifically: the cost of impact glass has been elevated since Ian-related demand pushed lead times and material costs up across the Gulf Coast. We source directly through authorized channels and do not mark up permit fees. If you are a senior or veteran, our permanent 5% discount applies to custom impact work the same as any other job. If your repair portion of the project clears $250, the standing $50 Off Any Repair Over $250 applies to that line item.
Call (239) 323-5522 for a free, no-obligation estimate. We come to the home, measure the opening, and give you a written quote on paper – not a range over the phone that later turns into something else.
Why TruePane for Custom Impact Windows in Fort Myers
There are contractors in Fort Myers who will order a close-size stock impact unit and shim it to fit rather than pay the fabrication premium for a true custom unit. The homeowner usually cannot tell the difference – until the inspector flags it, or the next hurricane season arrives, or the manufacturer denies a glass claim because the installed dimensions fall outside the approved product range.
We do not cut that corner. It costs more to fabricate to the correct dimension, and we tell you that upfront. What you get in return is a window that is code-compliant, warranty-eligible, and set correctly in the opening – not a catalog window forced into a custom situation and hoping for the best.
Over 42 years of serving this community, including the Fort Myers Beach neighborhoods that took the direct impact of Ian, has taught us that the difference between an impact window that holds and one that fails often comes down to whether the install was done to the manufacturer’s published installation instructions or improvised in the field. We install to the instructions. Both warranty layers get registered. The 90-Day Done Right Promise covers the rest.
Dale Kessler is a second-generation glazier who started measuring and cutting glass before he had a driver’s license. When he founded TruePane in 2008, it was specifically because he had spent years watching installs that were technically finished but not actually done right – fogged seals six months later, frames that racked in summer heat, warranties that turned out to cover nothing because the installer skipped the registration step. TruePane exists to fix that pattern, one opening at a time.
We are authorized installers for PGT and CGI, two of the most widely specified impact lines in Southwest Florida, along with more than a dozen other manufacturer lines. That authorization matters because it means factory training, access to the correct installation documentation, and the ability to register your warranty at the manufacturer level – not just hand you a brochure and hope you never need to use it.
Key Takeaways
- Custom impact windows are fabricated to your exact opening dimensions and must fall within the manufacturer’s Florida Product Approval range to remain legally impact-rated after installation.
- Typical installed cost in Fort Myers runs $850 to $2,400 per unit, depending on size, shape, glass package, and frame condition.
- Fort Myers and unincorporated Lee County both require a building permit for impact window replacement – TruePane pulls the permit and verifies product approval compliance before the order is placed.
- Both manufacturer warranty layers are registered in writing before our crew leaves your property, every time, without exception – that is The Keystone Standard.
- Senior and veteran discounts (5%) and the $50 Off Any Repair Over $250 offer apply to custom impact projects where eligible.
- A live person answers at (239) 323-5522 around the clock – no voicemail tree, no form submission, no callback window to schedule around.
FAQs – Custom Impact Windows in Fort Myers
How long does a custom impact window take from order to installation in Fort Myers?
Most custom impact window orders in Fort Myers run four to eight weeks from confirmed order to delivery, depending on the manufacturer, the glass package, and current production schedules. PGT and CGI both have fabrication facilities in Florida, which helps on regional demand spikes, but custom geometry takes longer than catalog pulls regardless of where the plant is located. We give you a realistic lead-time estimate when the order is placed – not a best-case number that sets you up for frustration. Call (239) 323-5522 to talk through timing on your specific project.
Do custom impact windows require a permit in Fort Myers?
Yes, Fort Myers and Lee County both require a building permit for impact window replacement, including custom units. The permit application references the product’s Florida Product Approval number, and a field inspection is required after installation. We pull the permit, manage the inspection scheduling, and verify that your custom unit’s fabricated size falls within the tested and approved range on the FPA listing before the order goes to the factory. A custom window that falls outside that approved size range is not code-compliant, regardless of what the glass itself can withstand – that is a detail some contractors skip, and homeowners find out the hard way during the next sale or insurance claim.
Are custom impact windows significantly more expensive than standard stock impact windows?
Custom impact units typically cost 20 to 45 percent more than a comparable stock impact window in the same manufacturer line. The premium covers the factory fabrication to your specific dimensions and, in the case of non-rectangular shapes, the additional cutting, laminating, and frame-joining work required to maintain the unit’s structural and impact certification. That cost is real and we tell you about it upfront. What it buys is a window that fits the opening correctly, holds its Florida Product Approval, and carries a registerable warranty – versus a stock window shimmed into a non-standard opening that may pass a cursory inspection but will not hold up to a serious product-approval audit or a manufacturer warranty claim. For a free written estimate on your specific openings, call (239) 323-5522.
Can TruePane match a custom impact window to the other windows already in my home?
In most cases, yes. When we come out to measure, we document the existing frame profile, sight-line height, glass height, hardware finish, and frame color on your current windows. If they are from a manufacturer line we are authorized to install – PGT, CGI, and others – we can typically order the replacement in a matching profile and color. If the existing windows are from a discontinued line or a manufacturer we do not carry, we will tell you honestly what we can and cannot match, and show you the closest available options side by side on paper so you can make the call. The goal is an elevation that looks intentional when the job is done.
Ready to Get a Straight Answer on Custom Impact Windows in Fort Myers?
Call (239) 323-5522 and a live person will pick up – day or night. We will schedule a time to come to your home in Fort Myers, measure every opening that needs attention, and put a written quote in your hands before we leave. No estimates that grow later, no pressure to decide on the spot, and no installer who disappears after the check clears. The 90-Day Done Right Promise and The Keystone Standard cover every job we take on. If it is not done right, we come back and make it right – in writing, no arguing required.
You can also learn more about the full range of specialty window work we do by visiting our home page, or by exploring everything under Custom & Geometric Windows in Fort Myers to see where custom impact work fits within our broader custom fabrication capabilities.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Myers.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.