Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI
Before
After
Before
After
Before
AfterGeometric & Shaped Windows in Fort Myers, FL | TruePane Windows & Doors
Geometric and shaped windows are the architectural signature pieces of Florida homes: triangles above a front entry, octagons catching morning light in a bonus room, curved glass softening a coastal elevation. They’re also the windows most likely to be built wrong if a contractor treats them like standard rectangles. TruePane Windows & Doors fabricates and installs custom impact-rated geometric and shaped windows across Fort Myers and Lee County, matched to your wind zone and your opening, not pulled off a shelf. If you’re planning a custom build or replacing an oddly shaped window that’s failed, call (239) 323-5522 and we’ll measure it properly the first time.
Product Overview - Geometric & Shaped Windows
A geometric window is any configuration that isn’t a standard rectangle. We regularly fabricate triangles for gable ends, hexagons and octagons for accent placement, circles and half-rounds for entryways, trapezoids for stairwells, and curved-top units that soften a facade. What makes these windows different from decorative glass you’d see up north is that every single one we install in Fort Myers carries an impact-rated laminated glass package engineered for the Florida Building Code’s High-Velocity Hurricane Zone requirements.
That’s the core value here: architectural detail without sacrificing wind-zone protection. A triangle over your front door in a coastal Fort Myers neighborhood takes the full brunt of wind-driven rain and debris in a storm. Build it with standard annealed glass and you’ve created a breach point. Build it with laminated impact glass and a properly engineered frame and you’ve got a window that looks custom but performs like every other protected opening in the house.
The frames themselves are either extruded aluminum or vinyl, depending on your home’s style and exposure. Aluminum suits most Fort Myers architecture, particularly mid-century and coastal contemporary homes. Vinyl works well on stucco and traditional Florida ranch styles. Both are custom-fabricated to your opening, which means the rough opening gets measured, the window gets built to those dimensions, and there’s no shimming a 36-inch unit into a 40-inch hole and hoping the trim hides it.
Technical Specifications
Here’s the spec sheet in plain language, because you shouldn’t need a glazing manual to understand what you’re buying.
- Frame materials: Extruded aluminum or multi-chamber vinyl, selected based on exposure and architectural style.
- Maximum size: Custom fabricated to order. Triangle, hexagon, octagon, radius, and trapezoid patterns are all built to your specific rough opening dimensions.
- Glass packages: Laminated impact glass with a PVB interlayer, Low-E insulated glass for energy performance, tinted glass for solar control, or clear glass for maximum visibility.
- Finish options: White, Almond, Bronze, Black, and Tan. These are the five finishes that cover the vast majority of Fort Myers elevations.
- Design pressure: Matched to your wind zone, up to +/-100 psf, never higher. We don’t overbuild a window for a zone that doesn’t need it, and we absolutely don’t underbuild one for a zone that does.
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers are available per configuration and included with your permit submittal package.
Hurricane & Compliance Performance
This is what separates a real impact-rated shaped window from a decorative one. Every point below is documented on your quote, not just claimed in a brochure.
Laminated Impact Glass
Two panes of glass bonded with a PVB (polyvinyl butyral) interlayer. When debris strikes, the glass cracks but stays in the frame. The window remains a sealed barrier against wind and water intrusion even after impact. This is the same glazing approach used in our full product line, including PGT and CGI configurations.
Miami-Dade NOA and Florida Product Approval
Notice of Acceptance and FL Product Approval numbers are issued per configuration. Your specific triangle or octagon has its own documented approval. We provide the numbers with your quote so your permit application in Fort Myers or unincorporated Lee County moves without delay.
FBC / HVHZ Compliance
Engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the stricter of the two Florida wind load standards, and most of Fort Myers falls under it. A window that’s only approved for the non-HVHZ parts of Florida won’t pass inspection here.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a specific protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These tests are the basis of the NOA and Florida Product Approval numbers we reference above.
Design Pressure for Your Wind Zone
Design pressures matched to your wind zone, up to +/-100 psf, never higher. Your home’s exposure category, roof height, and proximity to the coast determine the required rating. We calculate it during the quote process and spec the window accordingly. You don’t need to guess.
Energy Performance Options
Low-E and insulated glass packages are available on shaped configurations. In a Fort Myers climate with nine months of cooling season, a Low-E coated shaped window on a west-facing elevation meaningfully reduces solar heat gain without changing the architectural look.
Color & Glass Options
Five frame finishes cover most of what we see in Fort Myers: White for traditional stucco and cottage elevations, Almond for warm neutrals and the beige-heavy 1990s and 2000s builds that dominate much of Lee County, Bronze for darker accents and modern elevations, Black for contemporary coastal and industrial-modern builds, and Tan as a middle ground between almond and bronze. We stock matching hardware in all five so you don’t end up with white handles on a bronze frame.
Glass selection depends on where the window sits. Clear laminated impact glass works well on north-facing elevations where glare isn’t a concern and you want the truest color. Tinted glass suits south and west exposures in Fort Myers where afternoon sun is relentless. Low-E insulated glass is the right call for any shaped window on a conditioned living space, particularly when it’s a larger hexagon or octagon that functions as a primary daylight source. The PVB interlayer is present in every option, so impact performance doesn’t change with your glass choice.
Installation by TruePane Windows & Doors in Fort Myers
A shaped impact window is only as good as its installation. The NOA and Florida Product Approval assume the window is installed to a specific standard. If the opening is out of square, if the frame is shimmed incorrectly, or if the perimeter seal fails, you’ve got a water intrusion problem that no amount of documentation will fix.
Our process starts with a pre-installation inspection of the rough opening. We check for rot, termite damage, and existing flashing conditions before the window ever goes in, because installing a new impact window over a compromised opening wastes your money. We set every unit level, plumb, and square with the tolerances the manufacturer’s NOA requires. The perimeter gets sealed with AAMA 812 low-expansion foam and finished per AAMA 2400/2410 installation practice, which addresses the realities of Florida’s thermal expansion cycles and wind-driven rain.
After installation we run a water test on the perimeter and inspect the interior for any daylight gaps. We handle or coordinate the permit process in Fort Myers and Lee County, including the HVHZ product approval submittals your specific configuration requires. Coastal exposure in Fort Myers, particularly within a mile of the Caloosahatchee or the Gulf, raises the design pressure requirements on a project. We’ve been doing this long enough that none of it surprises us anymore.
Improper installation compromises the NOA-rated system. That’s not a scare tactic, it’s the reality of how these approvals work. The window gets tested as a system. Change how it’s installed and you change how it performs. That’s why we don’t sell these product lines as DIY or contractor-supplied labor. We install what we quote.
Frequently Asked Questions - Geometric & Shaped Windows
Design pressures are matched to your specific wind zone, up to +/-100 psf, never higher. The required rating depends on your home’s location in Fort Myers, its exposure category, and its roof structure. We calculate the requirement during the quote process and spec your windows to meet or exceed it. Call (239) 323-5522 for an exact determination on your property.
Custom-fabricated geometric and shaped windows typically have a longer lead time than standard rectangular units because the frame is extruded and assembled to your specific opening dimensions and configuration. Plan for fabrication to take several weeks from final measurement approval. We’ll give you a firm timeline on your quote, and we coordinate installation around it so you’re not left with a boarded opening.
Yes, for any impact-rated window in an HVHZ jurisdiction, which includes most of Fort Myers and Lee County. Your specific configuration, glass package, and frame size determine which NOA or FL Product Approval number applies. We provide the documentation with your quote and include it in the permit package. Call (239) 323-5522 and we’ll walk you through what your project needs.
Yes. Every geometric and shaped window in this line is custom-fabricated. Triangle, hexagon, octagon, trapezoid, half-round, and curved-top configurations are all built to the dimensions of your opening. If you’re working from architectural plans, send them over and we’ll spec each window before the rough openings are framed, which avoids costly reframing later.
Rinse the frame and track with fresh water every few months, particularly if you’re within reach of salt spray in coastal Fort Myers. Check the perimeter sealant annually for cracking or separation. Don’t pressure-wash directly at the frame joints, and don’t use abrasive cleaners on the glass, especially on Low-E or tinted surfaces. Years of coastal air will pit unfinished aluminum, so keep the factory finish intact.
Get a Quote - Geometric & Shaped Windows in Fort Myers
If you’re planning a build with geometric windows, or replacing shaped windows that have failed, let’s get your opening measured and quoted correctly. We’ll provide a written, line-item quote with your design pressure requirements, glass package, and finish. Call TruePane Windows & Doors at (239) 323-5522 to schedule your free on-site measurement in Fort Myers.
Written by the team at TruePane Windows & Doors, serving Fort Myers and Lee County with impact-rated window and door installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
