Entry Doors

Entry Doors in Fort Myers, FL | TruePane Windows & Doors

Entry doors do two jobs in Fort Myers. They set the tone for the whole front of the house, and they have to hold up when a storm pushes hard against them. Our Therma-Tru impact-rated entry doors handle both. We install fiberglass and steel systems that carry Miami-Dade NOA and Florida Product Approval documentation, so your door isn’t just attractive; it’s engineered for the High-Velocity Hurricane Zone we live in. TruePane Windows & Doors has installed these across Lee County, from McGregor Boulevard to Gateway, and we handle everything from the first measurement to the final water test. Call (239) 323-5522 to schedule your free on-site estimate.

Call (239) 323-5522

Product Overview - Entry Doors

In Fort Myers, an entry door gets more abuse than almost any other part of the home exterior. Afternoon sun, salt air, summer downpours, and the occasional hurricane all land on it first. The Therma-Tru entry door systems we install are built specifically for that reality. They are impact-rated without looking like industrial equipment. The fiberglass and steel profiles hold their shape through humidity swings that warp lesser doors, and the factory-finish options mean you aren’t dealing with peeling paint two years after installation.

Architecturally, these doors fit the homes we see every day across Fort Myers. A clean fiberglass panel reads as coastal contemporary in Cape Coral or Iona. A painted steel door with a decorative glass insert suits the Mediterranean and Spanish Revival styles common in McGregor and the Historic District. And a paint-grade woodgrain finish gives a traditional carved look without the rot risk of actual wood in our climate. All of it comes with the impact documentation your building department will actually ask for. TruePane Windows & Doors carries both factory-finished and paint-grade lines, so the design decision stays yours.

Technical Specifications

We keep the spec sheet simple because the important details should be readable, not buried. Here is what the Impact Series entry doors offer:

• Frame materials: Fiberglass or steel, both engineered for coastal humidity and high-wind exposure
• Maximum panel width: 48 inches wide, enough for a proper single entry with sidelight options discussed at quote
• Glass options: Decorative impact glass insert, Low-E insulated impact glass insert, or solid panel with no glass
• Finishes: White, black, bronze, or a paintable woodgrain finish that takes paint like real wood
• Design pressure: Matched to your specific wind zone, up to +/-100 PSF
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers provided per configuration
• Installation practice: AAMA 2400/2410 standards with AAMA 812 low-expansion foam perimeter sealant

Hurricane & Compliance Performance

Laminated Impact Glass
The glass inserts use a PVB interlayer between panes. When debris strikes, the glass may crack but it stays attached to the interlayer, keeping the opening sealed and your home protected from sudden pressurization.

Miami-Dade NOA / Florida Product Approval
Each configuration carries its own Notice of Acceptance or FL Product Approval number. We provide the specific documentation for your selected size, glass package, and frame when we generate your quote, so your permit submittal is clean.

FBC / HVHZ Compliance
These doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements, which govern Fort Myers and most of Lee County. That means the frame, glass, and hardware work as a system, not as separate parts.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a family of protocols: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. Impact-rated entry doors must pass this sequence, not just a single lab test.

Design Pressure for Your Wind Zone
Design pressure is the PSF rating that tells you what wind load the door can handle. We match the door to your home’s specific wind zone, up to +/-100, and never push a rating higher than the product line actually carries. Honest numbers are worth more than inflated ones.

Energy Performance
Low-E and insulated glass inserts are available for homes that want the storm protection without giving up thermal performance. In Fort Myers summers, an insulated entry door insert cuts a meaningful amount of heat transfer at the front of the house.

Color & Glass Options

Finish choice in Fort Myers is both an aesthetic call and a maintenance call. White and black are clean, modern choices that work well on newer construction in Gateway, Fort Myers Shores, and the developments off Daniels Parkway. Bronze is a common match on older Florida homes where bronze window frames are already in place. The paintable woodgrain finish is popular with owners in McGregor and along the river who want a traditional paneled look but refuse to deal with solid wood doors that swell in summer humidity. It takes paint properly, so your trim painter can match it to the existing fascia and shutters.

For glass, a solid panel is the strongest and most affordable option, with no glazing to maintain. A decorative impact glass insert adds curb appeal and light while keeping the NOA rating intact. The Low-E insulated insert is the right pick when the entry faces direct afternoon sun and you want to reduce heat load and glare in the foyer. All three meet the same impact standard.

Installation by TruePane Windows & Doors in Fort Myers

We install every entry door as a system, not just a slab in a rough opening. The process starts with a pre-install inspection of the existing frame, sill, and wall condition. In Fort Myers, we frequently find rot or settlement from years of humidity and afternoon thunderstorms, and a new door hung in a compromised opening will fail early. We address that before anything goes in.

The door is set level, plumb, and square, then sealed around the perimeter with AAMA 812 low-expansion foam. This is the detail that separates a tight, quiet, leak-free door from one that whistles in August. Our practice follows AAMA 2400/2410, which covers the full installation sequence: flashing, shimming, anchoring, and sealing. After the door is secured, we run a final water test and walk you through the operation and care of the hardware. We also know what Lee County and city of Fort Myers permit reviewers want to see for HVHZ projects, so the NOA submittal portion moves without you becoming a part-time permit coordinator. Improper installation will void the performance the manufacturer designed into this door, which is exactly why we encourage homeowners to avoid trying to save money on a handyman install for an impact-rated opening.

Frequently Asked Questions - Entry Doors

What wind zone and design pressure is the entry door rated for?
The Impact Series entry doors are available with design pressures matched to your home’s wind zone, up to +/-100 PSF. We confirm the exact rating for your configuration at quote time, using the address-specific wind zone data for Fort Myers and Lee County. Call (239) 323-5522 to get your specific number.

What is the lead time for an entry door in Fort Myers?
Most Therma-Tru entry door configurations run three to six weeks from order to delivery, depending on the glass package and finish selected. Custom sizes and certain decorative glass inserts add time. We confirm the current lead time when you place your order, and we schedule installation as soon as the door arrives.

Does my permit require a Miami-Dade NOA or Florida Product Approval submittal?
Yes, in Fort Myers and most of Lee County, an impact-rated entry door will require either a Miami-Dade NOA or a Florida Product Approval to be submitted with your permit application. We provide the documentation for the exact configuration you purchase, so the permit package is accurate. Call (239) 323-5522 if you need help determining what your project requires.

Can I customize the size or configuration?
Yes. The entry doors are available up to 48 inches wide, and we can add sidelights, transoms, or paired door configurations depending on your opening and your design goals. Every panel in the system still carries the impact-rated documentation for the full assembly. We will measure your opening and confirm what fits before you buy.

How do I maintain the entry door frame?
Fiberglass and steel frames need very little maintenance in this climate. Wash with mild soap and water, check the weatherstripping annually, and keep the bottom sweep free of sand and debris. For painted finishes, a periodic inspection of the door edge and threshold caulking is the quickest way to catch wear early. Call (239) 323-5522 if you notice the door sticking or air coming through the door edge.

Get a Quote - Entry Doors in Fort Myers

Ready to see what a properly installed impact entry door looks like on your home? We’ll come out, measure the opening, check the existing frame condition, and give you a written quote with the exact configuration and NOA documentation you’ll need. Call TruePane Windows & Doors at (239) 323-5522 to schedule your free on-site estimate in Fort Myers.

Written by the team at TruePane Windows & Doors, serving Fort Myers, FL with impact-rated window and door installations.