Therma-Tru Impact Windows Nationwide | TruePane Windows & Doors

Therma-Tru Impact Windows in Fort Myers: What to Know First

Therma-Tru impact windows in Fort Myers typically run $1,400 to $3,100 per opening installed, depending on the frame line, glass package, and what we find when we pull the old unit. We quote every Therma-Tru job in writing before work starts, and most single-opening repairs are finished in one visit. If you own a Therma-Tru door or window and it has lost its impact rating, failed a seal, or started binding in the frame, call (239) 323-5522 and we will walk you through what you are actually looking at.

Call (239) 323-5522

This page is for Fort Myers homeowners who bought Therma-Tru for the name and now need someone who understands the product well enough to service it properly. We are an independent Therma-Tru service provider, not a factory-authorized shop, which means we carry no obligation to upsell you into a full replacement when a repair will hold. Dale Kessler has been setting and sealing windows across Southwest Florida for the better part of three decades, and TruePane has been in the community for over 42 years. Ask for a free estimate and see for yourself.

How Therma-Tru Products Fail, and How We Fix Them

Therma-Tru built its reputation on fiberglass entry doors, but its window lines, the Classic-Craft series and the Smooth-Star line, show up regularly in Fort Myers homes. Here is what we see in the field.

• Seal failure in impact-rated insulated glass units. The Southwest Florida heat cycle is relentless. A Therma-Tru IGU that sits in direct afternoon sun on a west-facing wall will eventually fog between the panes. Once the argon or krypton fill escapes, the glass loses its insulating value and often its impact certification. We replace the IGU with a matched unit and re-seal the sash to spec, preserving the frame and the warranty trail.
• Frame warping on the Smooth-Star series in high-humidity installations. Smooth-Star is a fiberglass-reinforced composite, and it generally holds up, but we have pulled units in the McGregor Boulevard corridor where poor original flashing let water sit against the sill for a decade. The frame twists a quarter-inch and the sash binds. We re-flash the opening, true the frame, and reset the unit so the sash rides clean.
• Roller and track wear on Classic-Craft sliding patio doors. The Classic-Craft slider is a workhorse, but the factory rollers are a known weak point when sand and salt air get into the track. Fort Myers is hard on sliding hardware. We replace the rollers with aftermarket stainless units that outlast the originals and adjust the track so the door closes square against the weatherstripping.
• Impact glass delamination on older Therma-Tru windows. Impact-rated laminated glass is two panes bonded with a PVB interlayer. After fifteen or twenty years of UV exposure, that interlayer can begin to cloud or separate at the edges. The window still looks whole, but it will not stop a wind-driven 2×4 the way it should. We pull the sash, replace the laminated unit, and confirm the new glass carries the same DP rating as the original.
• Warped or rusted strike plates and hinges on outswing doors. Therma-Tru outswing entry doors in Fort Myers take salt air on the hinge side. The factory hardware corrodes, the door sags, and the impact seal at the threshold breaks. We replace the hardware with marine-grade stainless, re-shim the frame, and test the seal with a light bar so you can see the door is tight.

Our Therma-Tru Impact Windows Process

1. 1
   You call (239) 323-5522. A live person answers, every time, day or night. We schedule a time that fits your week.
2. 2
   We measure twice. Every opening is measured by a uniformed, background-checked technician who writes the numbers down in front of you. No guesswork, no “close enough.”
3. 3
   We diagnose before we quote. We identify whether the failure is in the IGU, the frame, the hardware, or the flashing. If the opening can be repaired honestly, we tell you. If replacement is the smarter move, we show you the numbers for both paths.
4. 4
   Parts: OEM where warranty matters, quality aftermarket where it outperforms. If your Therma-Tru product is still under warranty, we use OEM parts so the factory coverage stays intact. If it is out of warranty, we often use aftermarket components, stainless rollers, marine-grade hardware, upgraded seals, because they last longer in this climate.
5. 5
   We set, seal, and test. The new unit goes in square, the flashing is corrected if needed, and we test the weather seal with a light bar before we call the job done.
6. 6
   We register both warranty layers in writing before the truck leaves your driveway. If the pane is not true, the job is not done.

What Therma-Tru Impact Windows Costs in Fort Myers

Here is the honest math, based on what we see across Lee County.

• IGU replacement (seal failure, fogged glass): $350 to $650 per sash, depending on glass size and whether it carries a Low-E coating.
• Roller and track rebuild on a Therma-Tru slider: $180 to $320, including upgraded stainless rollers and track adjustment.
• Full impact window replacement, single opening: $1,400 to $2,600 installed. Price moves with frame material, glass package, and what we find when the old unit comes out.
• Full impact door replacement, outswing entry: $2,400 to $3,800 installed, hardware and threshold included.
• Complete home package, 8 to 12 openings: $14,000 to $28,000, depending on the mix of fixed, operable, and door units.

What moves the price most is the condition of the existing frame and flashing. A clean opening where the original flashing held is a fast job. An opening that has been leaking for ten years is a rebuild. We do not hide that difference in a change order. We put it in the quote, on paper, before you sign anything. Call (239) 323-5522 for a free estimate on your specific Therma-Tru openings.

Why Fort Myers Homeowners Call TruePane Windows & Doors for Therma-Tru Work

We have been serving Fort Myers for over 42 years, and we plan to be here in thirty more. That is not a slogan, it is how we run the shop. Every Therma-Tru job is covered by the 90-Day Done Right Promise. If it is not done right, we make it right, no paperwork, no arguing. And The Keystone Standard means both warranty layers, the manufacturer’s and ours, are registered in writing with the durations stated before our truck leaves your driveway.

We carry more than a dozen manufacturer lines, Andersen, Pella, Marvin, Milgard, Jeld-Wen, and for impact work we also install PGT, CGI, CWS, and ES Windows. That matters on a Therma-Tru visit because it means we are not married to one brand’s parts book. If an aftermarket part does the job better in a salt-air climate, we will tell you so, and show you the difference on paper. Side-by-side, in writing, like a square deal should be.

FAQs