ECO Window Systems Window Replacement Nationwide | TruePane Windows & Doors

ECO Window Systems Window Replacement: The Fort Myers Owner’s Guide

We stock and install ECO Window Systems-compatible replacement windows throughout Fort Myers, with most single-window replacements running $600 to $1,400 installed depending on size, glass package, and frame condition. We carry the common ECO sash balances, rollers, locks, and full insulated glass units on our trucks, so a straightforward swap is usually done in one visit. Most Fort Myers homeowners discover the problem the same way: a window that suddenly won’t stay up, a latch that spins without catching, or glass that’s fogged between the panes and won’t clear no matter how many times you wipe it.

Call (239) 323-5522

TruePane Windows & Doors is an independent service provider. We’re not affiliated with ECO Window Systems, but we’ve worked on enough of their product lines across Lee County to know exactly what we’re looking at when we pull a sash from the frame.

Key Takeaways

• Most ECO Window Systems replacements in Fort Myers run $600 to $1,400 installed for a standard residential window
• We stock common ECO parts on the truck and complete most replacements in a single visit
• Both manufacturer warranty layers get registered in writing before we leave your driveway
• Dale Kessler has spent three decades setting and sealing windows across Southwest Florida, including years of work on McGregor Boulevard’s older homes

Which ECO Window Systems Models This Applies To

ECO Window Systems has produced several series over the years, and the part you need depends on which one is in your wall. The most common lines we service in Fort Myers are the ECO vinyl single-hung and horizontal slider series, along with their impact-rated models that became popular after the 2004 hurricane code changes. The easiest way to identify yours is to look for the manufacturer sticker on the top edge of the sash or the inside of the frame track. It will list the series name, the glass package code, and usually a manufacturing date.

Here’s the compatibility gotcha we see regularly: ECO changed their balance shoe design on sliders and single-hungs around 2012. A balance assembly from a 2009 unit will not seat correctly in a post-2012 frame, even if the window dimensions are identical. We measure the balance channel width and shoe profile before ordering anything, because “looks the same” is how homeowners end up with a part that binds in July. On the OEM versus aftermarket question: ECO’s OEM parts are well made, but some of their older hardware lines have been discontinued. When that happens, we quote a quality aftermarket equivalent side by side on paper with the OEM option so you can see the difference in cost and warranty coverage before deciding.

Signs Your ECO Window Systems Window Replacement Is Failing

• The window won’t stay open. This is a balance or spring failure. The window’s weight hasn’t changed, but the counterbalance mechanism inside the frame has lost tension. In Fort Myers humidity, coil balances corrode faster than in drier climates, and once the coil snaps you’re fighting the full weight of the sash every time.
• The sash is hard to slide or lift. Rollers on sliders wear flat over time, especially when salt air from the Caloosahatchee works into the track. Once a roller stops rolling, it grinds. Every opening after that shaves a little more off the track.
• Fog or condensation between the glass panes. The insulated glass unit’s seal has failed. This is not a cleaning problem. The desiccant inside the spacer is saturated, and the only fix that restores the window’s thermal performance and visibility is replacing the IGU or the entire sash.
• The lock or latch spins without engaging. ECO’s older locking mechanisms used a die-cast keeper that strips after years of use. A lock that won’t engage is a security issue and also an air-infiltration problem, since the lock pulls the sash tight against the weatherstripping.
• Water staining or softness at the sill corners. This may look like a window problem but is often a flashing or installation problem from the original install. We see it frequently on Fort Myers homes built in the early 2000s where the original installer relied on caulk alone and skipped the sill pan. The window itself may be fine; the opening needs proper flashing before anything new goes in.

Replacement Cost & What’s Included

For Fort Myers homeowners, a complete ECO-compatible window replacement through TruePane typically lands between $600 and $1,400 per window installed. On the lower end, you’re looking at a standard vinyl sash or IGU swap with no frame damage. The higher end covers impact-rated glass packages, larger openings, and jobs where we’re rebuilding a rotted sill or reframing the rough opening before the window goes in.

Our pricing is line-item and fixed before work starts. No change orders unless you change the scope. The quote shows the part, the labor, any flashing or sealant materials, and the haul-away. Both warranty layers get registered in writing before the truck leaves your driveway, and every job carries our 90-Day Done Right Promise: if it’s not done right, we make it right. No paperwork fight, no fine print that covers neither. If the pane is not true, the job is not done.

DIY or Call Us?

There’s an honest split here. If your window is fogged between the panes, there’s no repair path for a homeowner, and honestly, not much of one for most contractors either. A failed seal means a new IGU or sash. If the issue is a loose handle or a dirty track, you can clean the track with a dry brush and tighten visible screws before you call anyone.

Where we tell homeowners to stop is with balances, springs, and anything that holds weight. Window balances are under constant tension, and the wrong move can send a sash down hard or put a coil spring through a finger. This is not scare-mongering; it’s the same warning we give our own apprentices before they touch their first balance. If you’ve got a window that slams shut or won’t stay up, call (239) 323-5522 and let one of our background-checked technicians measure it twice and fix it once.

FAQs