Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Fort Myers: What to Know First
CGI roof replacement and installation in Fort Myers typically runs $12,000 to $28,000 depending on roof complexity, CGI series selected, and whether you’re replacing an existing system or installing new. Most CGI roof projects in Lee County take 2 to 5 working days once materials are on site, and the biggest delay is usually permitting through the Fort Myers Building Department, not the labor itself. We’re an independent CGI service provider, not a manufacturer-authorized installer, which means we quote CGI honestly against comparable lines and let you decide with real numbers in front of you.
This page is for homeowners in Fort Myers who already own CGI products or are weighing CGI against PGT, CWS, ES Windows, or ECO Window Systems for a roof replacement. If you want a straight answer on whether CGI is the right line for your house, call (239) 323-5522 and ask for Dale. We’ll tell you what we’d put on our own homes.
Key Takeaways
- We install and replace CGI roof systems as an independent contractor, not a manufacturer dealer.
- Free estimates with line-item pricing on paper before you commit.
- Permits pulled and inspections passed on every CGI roof job in Fort Myers.
- The Keystone Standard applies: warranty layers registered in writing before the truck leaves.
- Call (239) 323-5522 for a free estimate. A live person answers, 24/7.
How CGI Products Fail - and How We Fix Them
CGI makes a solid product, but every roof system has weak points that show up in Southwest Florida’s salt air, humidity, and hurricane cycles. Here are the failure modes we see most often on CGI roofs in Fort Myers, and what we do about them.
- CGI Sentinel standing seam panel lifting at the ridge cap. We see this on homes within a mile of the Caloosahatchee where wind-driven rain finds its way under the cap. The cause is usually undersized fasteners or sealant that broke down faster than the panel. Our fix is removing the cap, inspecting the underlayment, reinstalling with the correct gauge fastener pattern, and sealing with a marine-grade product rated for coastal exposure.
- CGI Symphony series underlayment delamination under tile or shingle systems. The Symphony line depends on the underlayment as the real water barrier, and Fort Myers humidity accelerates delamination when the original installer skipped the primer step or used an off-brand membrane. We strip back to decking, verify the plywood is sound, and install a primary synthetic underlayment with a self-healing secondary layer around penetrations.
- CGI Board and Batten profile oil-canning on south-facing roof planes. This is a cosmetic issue but it announces thermal movement. The panels expand and contract more on the south side of a Fort Myers roof, and if the installer set the fasteners too tight, the metal waves. We can correct this by adjusting the fastener torque and adding proper expansion allowance at the panel ends where the original installer locked them down.
- CGI Fortress series hardware corrosion on coastal properties. Homes on Sanibel or along McGregor Boulevard sit in salt spray, and the exposed screws and clips on the Fortress line are the first thing to go. We replace corroded hardware with stainless steel rated for coastal environments and apply isolation pads between dissimilar metals so the galvanic reaction stops.
- Penetration flashing failures around skylights and vent pipes on all CGI systems. The roof panels hold up. It is the boots and collars that crack after ten years of Florida sun. We cut back the failure, install new lead or EPDM boots sized correctly for the pipe, and double-flash the penetration so the water runs past the opening rather than into it.
Our CGI Roof Replacement & Installation Process
Every CGI job follows the same sequence, whether it is a full roof replacement or a new installation on an addition. No shortcuts, no skipped steps.
- 1
Site visit and measurement. We walk the roof, photograph the decking, check the attic ventilation, and measure every plane twice. We also confirm the existing CGI component condition if this is a partial replacement.
- 2
Written line-item quote. You get the CGI series name, panel count, underlayment specification, fastener type, flashing details, and labor broken out on paper. No verbal estimates and no ballpark followed by a surprise.
- 3
Permit and material order. We pull the Fort Myers permit, order the CGI panels with the correct finish, and schedule the delivery so materials are not sitting exposed on your property for days.
- 4
Tear-off or deck prep. Existing roofing comes off or the new decking goes down. We inspect the plywood and replace any section with soft spots or water damage before anything gets covered.
- 5
Installation. Underlayment first, then the CGI panels with the correct fastener pattern and expansion allowance. Every penetration gets flashed twice. Ridge caps and edge details get sealed with coastal-rated products.
- 6
Water test and walkthrough. We run a hose test on the penetrations and valleys, then walk the roof with you before we leave. If anything looks off, we fix it before the truck moves.
And if it is not done right, the 90-Day Done Right Promise applies. No paperwork fights. No arguing. We come back and make it right.
What CGI Roof Replacement & Installation Costs in Fort Myers
Here are honest ranges for the CGI roof work we price most often in Lee County. These numbers assume a typical single-family home and include labor, materials, permit, and cleanup.
| CGI Scenario | Typical Range | What Moves the Price |
|---|---|---|
| CGI Sentinel standing seam, 2,000 sq ft roof, full replacement | $16,000 - $24,000 | Roof pitch, tear-off of two layers, skylight or chimney count |
| CGI Symphony tile-over system, 2,000 sq ft roof | $18,000 - $28,000 | Tile profile, existing deck condition, underlayment upgrade |
| CGI Fortress exposed-fastener panel, 1,500 sq ft roof | $12,000 - $18,000 | Panel gauge, trim complexity on hips and valleys |
| Partial replacement, single slope or porch roof with CGI | $4,000 - $9,000 | Deck repair on older homes, flashing integration with existing roof |
| New construction CGI roof install (no tear-off) | $14,000 - $22,000 | Roof geometry, ventilation requirements, code specifics |
What moves the price most in Fort Myers is the deck. Older homes in the McGregor Boulevard corridor often need sections of plywood replaced once the old roof comes off. That is not a markup game. That is the difference between a roof that lasts twenty years and one that telegraphs soft spots through the new panels in five. We show you the deck condition before we quote, not after.
Call (239) 323-5522 for an exact quote. Estimates are free, and the number on the quote is the number on the bill.
Why Fort Myers Homeowners Call TruePane Windows & Doors for CGI Work
TruePane Windows & Doors has served Fort Myers and Lee County for over 42 years through a heritage that started with Dale Kessler’s father running a small glazing operation in Columbus, Ohio. Dale spent decades setting and sealing windows and doors across Southwest Florida before founding TruePane in 2008, and the same standard applies to every roof we touch: if it is not in writing, it is not a promise.
We are an independent CGI service provider, which means we quote CGI without a sales quota attached to the brand. If CGI is the right roof for your house, we will say so and install it properly. If a PGT, CWS, ES Windows, or ECO Window Systems product fits your needs better, we will tell you that too, side by side on the same quote sheet. That is the difference between a contractor who sells one line and a company that stands behind what it installs.
Every TruePane technician is background-checked and uniformed. A live person answers our phone 24 hours a day, 7 days a week. We register both warranty layers in writing before the truck leaves your driveway. And we plan to be in Fort Myers in thirty years, which means the roof we install today has to hold up the way ours would.
FAQs
No, not if we follow the manufacturer’s installation specifications. As an independent CGI service provider, we install according to CGI’s published requirements so the warranty remains intact where the manufacturer’s coverage applies. But the warranty only protects what the manufacturer covers. The Keystone Standard is our commitment that both warranty layers get registered in writing, with durations stated, before we leave. Call (239) 323-5522 and we will walk you through exactly what your CGI warranty covers and where the gaps are.
Yes, in most cases. CGI maintains consistent color standards across their product lines, and we can match the profile and finish when you are adding onto an existing roof. The challenge in Fort Myers is sun fade on panels that have been exposed for a decade or more. We will order the correct color code and, if needed, source from the same coil batch to minimize visible differences. Call (239) 323-5522 for a free assessment of your existing roof.
Most full CGI roof replacements in Fort Myers take 2 to 5 working days once materials are on site and the permit is approved. The Fort Myers Building Department permitting timeline varies by season, and we handle that process from application to final inspection. Partial replacements often take 1 to 2 days. We will give you a schedule in writing before we start, and we’ll be there when we say.
That depends on what failed. Fastener corrosion, flashing leaks, and isolated panel damage can often be repaired. If the underlayment has failed across multiple roof planes or the decking shows water damage, we will recommend replacement and show you why with photos. We do not sell a replacement when a repair is the square deal, and we do not patch a roof that needs to come off. Call (239) 323-5522 for an honest assessment.
Yes. Every CGI roof replacement and installation in Fort Myers we perform goes through the proper permitting process and passes final inspection before the job is closed. Permits protect you, and we do not skip them. If a contractor offers to work without a permit in Lee County, that is a red flag worth paying attention to.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Myers and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.