Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI
Before
After
Before
After
Before
AfterCGI Roof Repair in Fort Myers: What to Know First
CGI roof repair in Fort Myers typically runs between $275 and $1,800 depending on whether we’re replacing a worn gasket, resealing a curb-mounted frame, or pulling glass to address a failing lamination. Most CGI service calls are completed in a single visit because we stock the wear parts that fail most often on these products. If you own a CGI roof product and something is leaking, fogging, or binding, call us at (239) 323-5522 and we’ll tell you honestly whether it’s a repair or a replacement.
This page is for homeowners in Fort Myers who have a CGI skylight, roof glazing system, or roof-mounted window and need straight answers. As an independent CGI service provider, we’re not affiliated with the manufacturer, but we’ve been repairing their products across Southwest Florida long enough to know exactly where they fail and what it takes to fix them right the first time.
How CGI Products Fail - and How We Fix Them
- CGI Estate Collection roof windows: gasket compression loss at the curb line. The Estate series uses a compression gasket between the glass frame and the mounting curb. After a decade of Florida sun, that gasket hardens, shrinks, and stops sealing. Owners see water staining on interior drywall but assume it’s flashing failure. In most Fort Myers homes, it’s the gasket, not the flashing. We replace it with a UV-stable EPDM gasket and reseat the frame. The stain stops growing, and the fix holds.
- CGI Sentinel series skylights: laminated glass separation along panel edges. The Sentinel line uses laminated impact glass, which is a genuinely strong product. But where the laminate edge meets the frame seal, we’ve seen moisture wick in over years and start a slow delamination. The telltale is a cloudy edge that moves inward. The fix is removing the unit, drying the channel, sealing with a marine-grade sealant, and reinstalling. If the delamination has spread past the edge band, replacement is the honest call.
- CGI roof-mounted fixed windows: sealant failure at the frame-to-curb interface. Fort Myers gets 55-plus inches of rain a year and months of direct sun on flat or low-slope roofs. The original sealant bead between the CGI frame and the curb eventually checks and cracks. Owners notice a drip only after heavy rain, which makes it hard to diagnose. We pull the old bead completely, not just cap it over, then reapply a two-part sealant rated for constant ponding exposure. Patching over old sealant is how you get a callback.
- CGI operable roof hatches and vents: hinge binding and latch misalignment. On older CGI roof hatches, the hinges were set for a structure that has since settled or expanded. The hatch binds, the owner forces it, and the latch mechanism bends. We true the hinge alignment, replace the latch if it’s beyond adjustment, and reset the closing tolerance. Forcing a bound hatch is how you crack the glass or tear the gasket, so we tell owners to stop using it and call us instead.
- CGI skylights in barrel-tile roof systems: improper original curb height. A recurring issue we see in older Fort Myers communities like McGregor Boulevard and Dean Park is that the original installer set the curb too low for a barrel-tile re-roof. Water channels against the frame during downpours, overwhelms even a good sealant, and seeps in. The fix is raising the curb, not caulking more. Dale Kessler has corrected more than a few of these, and the truth is the first installer cut a corner that took twenty years to show itself.
Our CGI Roof Repair Process
- 1
Call and describe what you’re seeing. A live person answers. We’ll ask when it happens, where the water shows up, and what the glass looks like. We schedule a visit on a day we can actually get on the roof without a storm in the forecast.
- 2
On-site diagnosis. We inspect the glass, the gasket, the sealant bead, and the curb. We measure twice. We tell you what we found, in plain language, before any work is authorized.
- 3
Parts decision. If OEM makes sense and the lead time is short, we use OEM. If a quality aftermarket part matches or exceeds the original spec and gets your home dry sooner, we quote both options side by side on paper so you see exactly what you’re buying.
- 4
The repair. We remove failed material completely. We don’t cap a cracked sealant bead or layer over a shrunken gasket. We clean, prep, and set everything the way a second-generation glazier would want it in his own roof.
- 5
Water test and inspection. We run a controlled water test over every repaired seam, check the interior for drips, and watch the sealant set. If it’s not dry, it’s not done.
- 6
Warranty registration and cleanup. Both warranty layers are registered in writing before the truck leaves your driveway, per The Keystone Standard. The roof is left cleaner than we found it.
Most CGI roof repairs are completed in a single visit. If the pane is not true, the job is not done. That’s the rule.
What CGI Roof Repair Costs in Fort Myers
- Gasket replacement on a single roof window: $275 to $475
- Sealant removal and reseal around one frame: $350 to $650
- Hinge realignment and latch replacement on a roof hatch: $400 to $800
- Glass unit removal, drying, and reseating with lamination repair: $650 to $1,200
- Full curb raise and frame reset (barrel-tile roof systems): $1,200 to $1,800
What moves the price in Fort Myers is curb condition, roof access (tile costs more to work around than shingle), and whether the glass needs to come out. We quote a fixed price before we start, and the number on the estimate is the number on the bill. No change orders, no surprise line items. Call (239) 323-5522 for a free estimate on your CGI roof repair.
Why Fort Myers Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been serving Southwest Florida for over 42 years, with Dale Kessler running TruePane Windows & Doors since 2008 on a rule he learned from his father in Columbus: if the work isn’t done right, you haven’t saved anyone a dime. Every CGI repair we complete is covered by our 90-Day Done Right Promise, which means if it’s not right, we make it right with no paperwork fights and no arguing. Our technicians are background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s. And if the repair leads to a bigger conversation about replacing your roof glazing, we quote CGI side by side with PGT, CWS, ES Windows, and ECO Window Systems so you can compare real numbers on paper, not marketing brochures.
FAQs
No. Because we use OEM parts where required and never modify the structural frame or glass, a repair done by an independent service provider does not void your CGI warranty. We document every material and method on your invoice so you have the record in writing, which is the only way a warranty conversation ever goes smoothly.
Most common CGI wear parts, including gaskets, latches, and sealant systems, are on our truck or available locally within a few days. If a full glass unit needs to be ordered from the factory, lead times can stretch to two or three weeks, and we’ll tell you that before we quote so you’re not waiting on a surprise.
The answer depends on the glass condition and the frame integrity. If the glass is clear, the frame is square, and the leak is at the gasket or sealant line, repair makes sense and costs a fraction of replacement. If the laminate is delaminating past the edge band or the frame has corroded through, replacement is the honest long-term call. We’ll show you the evidence either way. Call (239) 323-5522 and we’ll assess it on the roof.
Yes. We’ve done it many times in neighborhoods like McGregor Boulevard and Dean Park where the original curb was set too low for the roof system. It’s a more involved job because tile has to come off and go back on, but it’s the permanent fix. Caulking over a bad curb height is a six-month patch, and we won’t sell you one.
We can inspect the unit, document the damage for your insurance claim, and give you a written repair estimate that stands up in front of an adjuster. We’re not a public adjuster and we don’t negotiate your claim, but we write clear, factual documentation. If it’s not in writing, it’s not a promise. Call (239) 323-5522 and we’ll get up there.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Myers and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.