Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
French & Double Doors in Fort Myers, FL | TruePane Windows & Doors
French and double doors bring something no sliding unit can: a wide, symmetrical opening that makes a room feel connected to the outdoors. But in Fort Myers, a standard French door is a liability. The real version for this market is paired impact-rated doors with laminated glass in every lite, multi-point locking hardware, and a frame that’s engineered to take a storm without flexing. TruePane Windows & Doors installs these systems across Lee County for homeowners who want the look of classic double doors without gambling on hurricane season. We’ve been doing this work in Fort Myers long enough to know how these units perform on specific exposures, from McGregor Boulevard colonials to newer builds in Gateway. Call (239) 323-5522 to talk through your opening.
Product Overview - French & Double Doors
These are paired impact-rated French doors with laminated glass in every lite. The sightlines are symmetrical, so each door panel reads as a mirror of the other. That’s the detail that separates a proper French door from two slabs hung side by side. The hardware is multi-point: when you throw the handle, locking pins seat at the head, the sill, and the meeting stile, so the doors hold as one assembly, not two independent panels.
In Fort Myers, these doors are spec’d on master suites opening to lanais, dining rooms leading to pool decks, and front entries on higher-end remodels. The reason is simple: they’re the only double-door configuration that meets Florida Building Code High-Velocity Hurricane Zone requirements while still looking like something you’d find on a French country house or a Mediterranean villa.
Materials matter here. Aluminum frames give you the narrowest sightline and the highest structural rigidity. They’re what we specify most often for Fort Myers waterfront and coastal-exposure homes. Vinyl frames run cooler to the touch and are the right call for inland neighborhoods like Buckingham or Lehigh Acres where thermal performance matters more than salt-air resilience. Both are mated to laminated impact glass, which is the non-negotiable core of the system.
TruePane Windows & Doors carries this product across the PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. That means we aren’t pushing one brand. We quote the configuration your opening actually needs.
Technical Specifications
Here’s what you’re actually selecting when you spec French and double doors through TruePane Windows & Doors. These are the values we configure to, and the options we walk every Fort Myers homeowner through during the estimate.
- Frame materials: Aluminum or vinyl, selected by exposure, budget, and architectural style.
- Maximum width: Up to 96 inches total opening width, depending on panel configuration and hardware.
- Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, or clear glass.
- Finish options: White, almond, bronze, black, and tan.
- Hardware: Multi-point locking at head, sill, and meeting stile.
- Design pressure: Matched to your wind zone, up to +/-100 PSF. Never higher than your zone requires.
- Compliance: Miami-Dade NOA and Florida Product Approval numbers issued per configuration. Engineered to FBC HVHZ requirements.
We don’t sell a one-size-fits-all unit. The frame material, glass package, and finish get selected after we look at your opening, your elevation, and your wind zone. Call (239) 323-5522 and we’ll walk the options specific to your house.
Hurricane & Compliance Performance
Laminated Impact Glass
Every lite in these doors carries a PVB (polyvinyl butyral) interlayer. When debris strikes, the glass cracks but the interlayer holds the pieces in the frame. The opening stays sealed. Water, wind, and whatever the storm throws at it stay outside where they belong.
Miami-Dade NOA / FL Product Approval
Each configuration we quote carries a Miami-Dade Notice of Acceptance or Florida Product Approval number. These are issued per configuration, not per product family. You’ll see your specific numbers on the quote we give you before you sign anything.
FBC / HVHZ Compliance
These doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the standard Fort Myers and all of Lee County build under. It’s not optional here, and we don’t sell anything that doesn’t meet it.
TAS 201 / 202 / 203 Testing Context
The protocol family these products are tested under includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. That last one matters to our Fort Myers customers who travel north for months at a time.
Design Pressure Matched to Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, never higher. Your home on the Caloosahatchee doesn’t need the same rating as a beachfront condo on Sanibel. We spec to what your zone requires, which keeps the math honest and the price where it should be.
Energy Performance
Low-E insulated glass options are available on these units. If your French doors face west or catch full afternoon sun, this is the difference between a lanai you use and one you abandon by June. Clear and tinted glass are also available depending on what you’re chasing: light, privacy, or thermal control.
Color & Glass Options
Five finishes cover nearly every Fort Myers exterior: white, almond, bronze, black, and tan. White and almond read clean and bright on the white-stucco and light-brick homes common in neighborhoods like McGregor and Whiskey Creek. Bronze and black give you the contrast that works on modern builds in Fort Myers proper, and on the deeper earth tones you see in WildBlue and Westbrook. Tan disappears against beige stucco, which is exactly what some HOAs want.
Glass selection is about trade-offs. Clear laminated impact glass gives you maximum light transfer, which matters on shaded lanais. Tinted glass cuts glare, which makes sense on east-facing patio doors that catch morning sun. Low-E insulated glass is the pick for air-conditioned rooms adjacent to full-sun exposures, and it’s what we recommend for most master suites in Fort Myers. Your quote will show each glass type line-itemed with the price delta.
Installation by TruePane Windows & Doors in Fort Myers
Here’s the part most people don’t think about until a problem shows up: an impact-rated door is only as good as the install. The NOA number applies to the manufactured unit. The hole in your wall it goes into is our work. If the rough opening is out of square, if the perimeter seal isn’t right, if the head jamb flexes, the door fails. Not on day one, maybe not on day three hundred. But eventually.
That’s why TruePane Windows & Doors runs every French and double door installation in Fort Myers through the same process. We start with a pre-install inspection of the opening: framing condition, sill condition, rot check, water intrusion history. If the rough opening is compromised, we fix it before the door goes in. We don’t bury it behind new trim.
The unit gets set level, plumb, and square. The perimeter is sealed with AAMA 812 low-expansion foam, which is the correct tool for the job: it seals without bowing the jamb. Our installation practice follows AAMA 2400/2410 standards. After the door is hung, we run a water test, cycle the door a few dozen times to confirm the operation is smooth, and clean up. You don’t know our crew was there except for the door in the wall.
Fort Myers is an HVHZ jurisdiction. Permits are required for this work. We’re familiar with the submittal process and what Lee County and the City of Fort Myers want to see on an NOA and Florida Product Approval. If the permit review comes back with questions, we answer them. You don’t get a pile of paper and a shrug.
Frequently Asked Questions - French & Double Doors
Design pressures are matched to your wind zone, up to +/-100 PSF, never higher. Your specific rating depends on the location, the opening size, and the configuration. We verify the numbers for your exact house during the estimate.
Most French and double door configurations we order for Fort Myers run roughly 6 to 10 weeks from final measurement to delivery, though custom sizes and certain finish combos can push longer. We’ll give you a production update when your order is placed. Call (239) 323-5522 and we can tell you what current lead times look like for the brand and configuration you’re considering.
Yes. The City of Fort Myers and Lee County both require the NOA or Florida Product Approval documentation specific to your door configuration as part of the permit package. We provide the correct numbers for your exact unit and work through the submittal with you.
Most of our Fort Myers projects are custom-size. The 96-inch maximum overall width gives you room to work, but the exact panel widths, active leaf, stationary leaf, and hardware placement get tailored to your opening and how you actually use the door.
Wash the frames with mild soap and water twice a year, more often if you’re on a saltwater canal or close to the Gulf. Rinse the track and hardware, and keep the weep holes clear. Our installers walk you through the care basics at final walkthrough. That routine keeps the finish intact and the hardware running smooth.
Get a Quote - French & Double Doors in Fort Myers
Replacing a double door in Fort Myers is a project that deserves a real number, not a website estimator. We’ll measure your opening, check the exposure, and price your French and double doors with the exact glass, finish, and hardware you selected. Call (239) 323-5522 to schedule a free on-site measurement.
Written by the team at TruePane Windows & Doors, serving Fort Myers, FL and greater Lee County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images









Before
After
Before
After
Before
After