Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI
Before
After
Before
After
Before
AfterSingle Hung Windows in Fort Myers, FL | TruePane Windows & Doors
Single hung windows remain one of the most common impact-rated replacement profiles we install in Fort Myers, FL. The design is straightforward: a fixed upper sash and an operable lower sash, both glazed with laminated impact glass that holds together under storm debris. We’ve put these into coastal condos near Fort Myers Beach, 1970s ranch homes off McGregor Boulevard, and newer builds in Gateway. They’re a practical choice when you want hurricane protection without changing the architectural character of your home. TruePane Windows & Doors carries single hung impact windows across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, so we can match your budget and your existing framing. Call (239) 323-5522 to schedule a free on-site measurement.
Product Overview - Single Hung Windows
A single hung window operates the bottom sash only. The top sash never moves. For Florida homeowners, that’s not a drawback - fewer moving parts means fewer places for air and water to work their way in during a storm. The fixed upper sash sits in a sealed frame with laminated impact glass, and the lower sash rides in a track with compression weatherstripping that keeps the seal tight when closed. We see this profile constantly in Fort Myers because it’s cost-effective, simple to operate, and provides the protection that insurance carriers and local building officials want to see. What makes a single hung impact window genuinely hurricane-ready isn’t the number of operable sashes. It’s the lamination, the frame rigidity, and the installation. TruePane Windows & Doors installs every unit level, plumb, and square against AAMA 2400/2410 practice, so the engineering in the window performs the way it was tested. Whether you’re replacing original aluminum single pane windows in a Lee County home or upgrading from non-impact vinyl in the Iona neighborhood, this profile is a practical, durable solution for Fort Myers, FL.
Technical Specifications
Single hung windows from our impact series are available in two frame materials, each with distinct advantages for Fort Myers homes. Here’s what you can specify on your quote:
- Frame materials: Aluminum or vinyl. Aluminum gives you a narrow sightline and a modern look common in Fort Myers coastal architecture. Vinyl offers thermal performance and lower maintenance in a traditional profile.
- Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, or clear glass. Combinations are available - Low-E with lamination, tinted with lamination, and clear laminated for maximum light.
- Finish options: White, almond, bronze, black, and tan. These cover the standard exterior color palette across Southwest Florida communities.
- Screen options: Half screen on the lower operable sash, or full screen for whole-opening coverage. Most Fort Myers homeowners choose half screen for a cleaner look and easier cleaning access.
- Design pressure: Matched to your wind zone, up to +/-100 PSF. We never overspec a window beyond what your opening needs.
- Compliance: Miami-Dade NOA and Florida Product Approval numbers issued per configuration. Verify on your specific quote.
Hurricane & Compliance Performance
Single hung windows from our impact series are built around one principle: the glass stays in the frame when a storm hits. Here’s how each component of the system works.
Laminated Impact Glass - Two panes of glass bonded to a PVB (polyvinyl butyral) interlayer. Under impact, the glass cracks but the interlayer holds the broken pieces in place. The opening remains sealed against wind, rain, and flying debris penetration even after a direct hit.
Miami-Dade NOA / Florida Product Approval - Each configuration carries a Notice of Acceptance from Miami-Dade County or a Florida Product Approval number, issued per configuration. Your specific glass, frame, and size combination determines which number applies. We verify this on your quote.
FBC / HVHZ Compliance - Engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. That’s the strictest wind-borne debris region in the country, and Fort Myers sits inside it. These windows are designed for that standard.
TAS 201 / 202 / 203 Testing Context - HVHZ-rated products must pass a protocol family: TAS 201 for large-missile impact, where a length of lumber is fired at the glass; TAS 202 for cyclic wind-pressure loading, which simulates hurricane gusts over thousands of cycles; and TAS 203 for forced-entry resistance, which tests the frame and locking hardware. This is what qualifies a product for HVHZ use.
Design Pressure for Your Wind Zone - Design pressure is a PSF rating, not a wind speed. We match the DP rating to your specific wind zone, up to +/-100 PSF. We never go higher because overspeccing adds cost without adding protection. Your opening location in Fort Myers, FL, your roof line, and your exposure determine the right number.
Energy Performance - Low-E and insulated glass options are available. Low-E coatings reduce solar heat gain, which matters on west-facing windows in Fort Myers afternoons. Insulated glass adds thermal resistance while keeping the laminated impact layer for storm protection.
Color & Glass Options
Fort Myers homes run the full architectural range: mid-century concrete block, Mediterranean stucco with barrel tile, coastal contemporary with clean lines. Your finish choice should work with what’s already on the house. White is the most common finish in Fort Myers and blends with almost every trim style. Almond and tan sit naturally on warm stucco tones. Bronze and black are increasingly popular on modern and transitional elevations, and they read crisp against white trim. Glass choice depends on how the room gets sun. Clear laminated is the right call when you want maximum daylight and your windows face north or are shaded by a lanai. Tinted laminated cuts glare on east- and west-facing elevations. Low-E insulated glass is the strongest energy performer, especially on south-facing walls that get full sun all day in Lee County. You don’t have to pick one glass for the whole house. We regularly mix glass packages across elevations to solve specific heat and glare problems in Fort Myers homes.
Installation by TruePane Windows & Doors in Fort Myers
An impact window is a tested, engineered system. But the test was done with proper anchoring and a sealed perimeter. Installation that ignores those details turns a rated window into an unrated one. That’s why TruePane Windows & Doors follows a consistent process on every single hung window installation in Fort Myers, FL. We start with a pre-install inspection of the opening: the condition of the rough framing, the existing flashing, any hidden water damage from past leaks. Then we remove the old window, prepare the opening, and set the new unit level, plumb, and square. We anchor per the manufacturer’s approved installation method for HVHZ conditions. We seal the perimeter with AAMA 812 low-expansion foam and install the exterior flashing and caulking per AAMA 2400/2410 standard practice. After install, we run a final water test on the opening, clean the glass and frame, and walk you through the operation and maintenance of your new windows. In Fort Myers, you’re working in a coastal exposure zone with a defined wind zone. That changes anchoring requirements, sealant choices, and the documentation your permit application needs. We know what Lee County and the local municipalities expect. Proper installation is not optional here. It’s the difference between a window that holds and one that fails when you need it.
Frequently Asked Questions - Single Hung Windows
Single hung windows from our impact series are matched to your specific wind zone, with design pressures up to +/-100 PSF. Your home’s location in Fort Myers, FL, its roof height, and its exposure determine the exact DP rating. The window is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Call (239) 323-5522 and we’ll identify your wind zone and spec the right DP on your free estimate.
Lead time depends on the line you choose and the glass configuration. Our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines have different production schedules. Standard aluminum single hung units in common sizes often ship within a few weeks. Custom sizes, Low-E upgrades, and specific finish choices can extend that. We give you a firm lead-time estimate before you commit to your quote.
In Fort Myers and most of Lee County, yes, your permit package will typically require the NOA or Florida Product Approval number for the exact window configuration you’re installing. Every product we install comes with documentation per configuration. TruePane Windows & Doors provides the documentation your permit application needs, and we’re familiar with what Lee County plans examiners look for. Call (239) 323-5522 and we can walk you through the permit process for your project.
Yes, within the tested envelope for each product line. Common stock sizes cover most existing openings in Fort Myers homes, but custom widths and heights are available from most of our manufacturers. Configuration options include glass package, finish color, and screen choice. The key is that your chosen configuration must have a matching NOA or Florida Product Approval. We confirm that before we order.
Maintenance is minimal on both aluminum and vinyl frames. Clean the track with a dry brush or vacuum a few times a year, especially during spring pollen season in Fort Myers. Wipe the frame with mild soap and water. Keep the weep holes clear so water drains away from the interior. Lubricate the lock and moving hardware with a silicone-based product as needed. Never use harsh solvents on the glass or the frame finish.
Get a Quote - Single Hung Windows in Fort Myers
Serving Fort Myers, FL and surrounding Lee County communities, TruePane Windows & Doors installs single hung impact windows on schedule and to spec. We start with a free on-site measurement, review your wind zone and existing framing, and give you a written line-item quote with your NOA or Florida Product Approval numbers before you sign anything. Call (239) 323-5522 to schedule your free estimate today.
Written by the team at TruePane Windows & Doors, serving Fort Myers, FL with hurricane-impact window and door installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
