Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI
Before
After
Before
After
Before
AfterCGI Shingle, Tile & Metal Roofing in Fort Myers: What to Know First
CGI shingle, tile and metal roofing in Fort Myers is a repair we handle regularly, and most jobs are diagnosed and fixed in a single visit. As an independent CGI service provider, TruePane Windows & Doors repairs and replaces CGI roof glazing, skylights, roof windows, and the flashing assemblies around them. We charge a straight price for the work, written out before we start, and we stand behind it with a 90-Day Done Right Promise. This page is for homeowners in Fort Myers, Cape Coral, Estero, and the McGregor Boulevard corridor who have CGI roof glazing that is leaking, fogged, cracked, or simply not sealing the way it should. If you are looking at a stain on the ceiling and want to know what it will take to fix it, call (239) 323-5522.
How CGI Products Fail - and How We Fix Them
CGI builds a stout product, but roof glazing lives in the meanest environment a window or skylight can face: full sun, wind-driven rain, and the salt and heat of a Southwest Florida summer. Here is what we actually find when CGI roof units start giving trouble in Fort Myers.
- CGI Estate Collection skylights: seal compression failure at the curb mount. The Estate line uses a compression gasket between the frame and the roof curb. After ten or fifteen years of Florida sun, that gasket shrinks and loses its memory. Water wicks in along the uphill edge, especially on low-slope roofs where standing water sits after a storm. We remove the unit, replace the curb gasket with a marine-grade equivalent, and re-set the frame with fresh sealant. This is not a caulk-and-pray patch; we take the unit out and do it right.
- CGI Sentinel roof windows: operator gear wear from salt exposure. The Sentinel operator mechanism is a geared arm that opens and closes the sash. In Fort Myers, the salt air works its way into that gear set, and within a few seasons the window will not crank smoothly, if it cranks at all. Homeowners call us thinking they need a whole new window. Most of the time we replace the operator assembly with either CGI OEM parts or a quality aftermarket equivalent, lubricate, and send the window back to work.
- CGI fixed roof glazing on flat or low-slope roofs: failed flashing bond. This is the one we see most often after a big storm season. The flashing CGI specifies bonds to the frame at the factory, but on site the roofer is responsible for tying that flashing into the roofing membrane. When the bond between flashing and roofing material breaks down, water travels under the flashing and shows up as a ceiling stain three feet away from the window. We find the actual leak path, pull the bad flashing, and re-flash with materials that match the existing roof system.
- CGI Targa Series venting roof windows: dusty or fogged glazing from seal puncture. A fogged Targa unit usually means the insulated glass seal has been breached, often by hail or by a branch that hit the glass years ago and left a pinhole that finally let moisture in. We assess the sash, confirm the leak point, and replace the insulated glass unit. The frame, the curb, and the flashing often do not need to be touched, which keeps the price honest and the job quick.
- CGI roof glazing on older Fort Myers homes: undersized or rusted curb framing. We work a lot of older homes in the McGregor Boulevard corridor, and the roof curbs under those skylights were often site-built from dimensional lumber thirty years ago. Florida humidity and the occasional leak rot them out. If you set a new CGI unit on a rotted curb, you are throwing money away. We inspect the curb before we quote the glazing work, and if the curb needs rebuilding, we tell you before you sign anything.
Our CGI Shingle, Tile & Metal Roofing Process
Here is how a CGI roof glazing job goes when you call TruePane Windows & Doors at (239) 323-5522.
- 1
Call and talk to a person. A live person answers, day or night. We take your address, the make and model of the unit if you can read the label, and a description of what you are seeing. We schedule a visit and we show up when we say.
- 2
On-site diagnosis. A background-checked, uniformed technician climbs up and looks at the unit, the flashing, the curb, and the roofing material around it. We measure every opening twice. If it is raining or the roof is wet, we note that and adjust the plan accordingly.
- 3
Written quote with the parts line itemized. We tell you whether the fix calls for CGI OEM parts, a quality aftermarket equivalent, or a full sash replacement. We put the price in writing before any work starts. If we see something else that needs attention, we tell you then, not later.
- 4
The repair or replacement. We remove what needs removing, replace what needs replacing, and seal everything the way the manufacturer specifies. We work clean, and we do not leave scraps on your roof or in your yard.
- 5
Test and document. We run water over the repair if possible, operate the window or skylight, and check the seal. We register both manufacturer warranty layers in writing before we leave the driveway when a new unit is involved.
- 6
Guarantee. Every repair is covered by our 90-Day Done Right Promise. If something is not right, we come back and make it right. No paperwork fights, no arguing about who said what.
What CGI Shingle, Tile & Metal Roofing Costs in Fort Myers
CGI roof glazing repairs in Fort Myers run from about $260 for a simple operator replacement or seal renewal to $850 or more for a full flashing re-work or insulated glass replacement on a large roof window. A full CGI skylight or roof window replacement with new curb and flashing commonly lands between $1,800 and $4,200 depending on the unit size, the roof material, and whether the curb needs rebuilding. Here is how the common scenarios break down.
| Job Type | Typical Range in Fort Myers |
|---|---|
| Operator or gasket replacement | $260 - $420 |
| Flashing repair or re-flash | $380 - $700 |
| Insulated glass replacement (fogged unit) | $450 - $850 |
| Full skylight/roof window replacement with curb work | $1,800 - $4,200 |
What moves the price is the condition of the curb, the roof material (tile roofs take longer to flash correctly than shingle), and the size of the unit. Slate or clay tile roofs require slower, more careful flashing work, and that labor shows up in the quote. The estimate is free, and the price on it is the price on the bill.
Why Fort Myers Homeowners Call TruePane Windows & Doors for CGI Work
TruePane has served Fort Myers and the surrounding communities for over 42 years. We are not a franchise operation and we do not run a call center. Dale Kessler learned the glazing trade starting on the west side of Columbus, Ohio, and has spent the better part of three decades measuring, setting, and sealing windows and doors across Southwest Florida, including years of work on McGregor Boulevard, where the old homes demand patience. We know CGI products because we work on them every month, and we also service PGT, CWS, ES Windows, and ECO Window Systems, so if your roof glazing is CGI but your windows are PGT, one crew can handle the whole scope.
Every job carries The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, and our 90-Day Done Right Promise behind it. If the pane is not true, the job is not done. That is the rule that names the company, and it governs every roof glazing repair we take on in Fort Myers.
FAQs
No, a proper repair by an independent CGI service provider using OEM or correctly specified parts preserves your warranty coverage. Using aftermarket parts in a way that conflicts with CGI’s specifications can jeopardize coverage, which is why we walk you through the parts decision before we start and register both warranty layers in writing when a new unit goes in.
In most cases, yes. A fogged CGI skylight usually means the insulated glass seal has failed, and the fix is replacing the glass unit itself, not the frame or curb. That keeps the job smaller and cheaper than a full replacement. Call (239) 323-5522 and we will tell you which path applies to your unit after a diagnosis.
We schedule roof glazing repairs as quickly as our calendar allows, and a live person answers the phone 24/7 so you are never leaving a message. A leaking roof window needs to be addressed, and we will give you a straight answer on timing when you call.
That depends on the condition of the curb, the flashing, and the glass. If the frame is solid and the leak is at the flashing, a repair makes sense. If the curb is rotted or the frame is warped or the unit is more than 25 years old, replacement is usually the better long-term call. We will show you what we see and give you an honest recommendation.
Yes, we service PGT, CWS, ES Windows, and ECO Window Systems roof glazing as well, so you do not need multiple companies for a house with mixed brands.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Myers and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.