Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Windows & Doors in Fort Myers, FL | TruePane Windows & Doors
We provide independent Mr-Glass window and door service throughout Fort Myers, from Lehigh Acres to McGregor Boulevard, with no factory affiliation. The one thing that sets our Mr-Glass work apart here is simple: we know which Mr-Glass models can be repaired to current Lee County code after Hurricane Ian, and which ones cannot. That knowledge saves Fort Myers homeowners real money. Call (239) 323-5522 for a free estimate.
Why Fort Myers Residents Choose Us for Mr-Glass Service
Mr-Glass windows and doors are common across Fort Myers, particularly in homes built between the 1970s and early 2000s. We have spent years diagnosing and retrofitting Mr-Glass 100 Series single hungs, 300 Series horizontal rollers, 500 Series 3-panel sliders, and 700 Series casements in CBS construction all over Lee County. Dale Kessler, our owner, grew up in his father’s glazing shop in Columbus, Ohio, and has spent the better part of three decades setting and sealing windows along the McGregor Boulevard corridor before building TruePane around one idea: a window installation done right the first time costs less than one done twice. That matters when you own a Mr-Glass unit that is twenty-five years old and sitting in a stucco opening that has never been corrected. We use OEM-compatible parts where they make sense, and we tell you straight when a repair is throwing good money after bad. Browse our Mr-Glass sales & service options to see the full scope.
Common Mr-Glass Windows & Doors Problems We Solve in Fort Myers
- Fogged insulated glass units from seal failure. Older Mr-Glass double pane windows fail most often on west-facing elevations in Fort Myers, where the afternoon Gulf sun and heat cycles work the desiccant until the seal gives out. You get condensation between the panes that no cleaning will remove. We replace the IGU and correct the glazing bead, and we check the frame for the UV damage that usually accompanies seal failure here.
- Seized or grit-filled Mr-Glass horizontal roller tracks. Fort Myers sits close enough to the Gulf that salt-laden air works its way into roller bearings and aluminum tracks. Panels skip, jam, or feel like they are dragging through sand. We pull the panels, clean or replace the rollers, and rebuild tracks when corrosion has eaten through the profile.
- Warped or chalked Mr-Glass vinyl frames on south-facing windows. Fort Myers UV does not just fade paint. It embrittles vinyl frame corners and opens miter joints, which lets humid air into the wall cavity behind the stucco. You may not see it until the window is pulled. We measure every frame corner with a machinist’s square before recommending repair or replacement.
- Failed Mr-Glass casement operators and hinge arms. High humidity rusts zinc-plated hardware, and repeated cranking under wind load strips the gear teeth on Mr-Glass 700 Series casements. Sashes will not rack square, and the window will not close tight. We replace operators and hinge arms with stainless hardware rated for coastal exposure.
- Post-Ian code compliance failures on original single-pane Mr-Glass units. We regularly pull Mr-Glass single hungs from 1980s Fort Myers CBS ranches and find the original units carry no Florida Product Approval number. After Ian, Lee County inspectors will not sign off on a like-for-like replacement. We walk you through the impact-rated options that satisfy today’s design-pressure requirements.
Mr-Glass Service in Fort Myers: What Local Conditions Mean for Your Equipment
Fort Myers is the only major Southwest Florida city where Hurricane Ian made direct landfall as a Category 4 in September 2022, and that fact changed the repair-versus-replacement math for every Mr-Glass owner in Lee County. Inspectors now flag any window or door swap as a permit-required alteration that must meet current Florida Product Approval design-pressure ratings for your home’s specific wind zone. What that means in practice: a 1988 CBS ranch in Lehigh Acres with original single-pane Mr-Glass windows is not going to pass with a like-for-like swap. The inspector will require engineered impact units with documented DP ratings, and the homeowner who budgeted six hundred dollars is looking at three thousand or more. We tell people this before we pull the first window. It is not the conversation anyone wants, but it is cheaper than paying for two jobs. Our tech pulled a Mr-Glass 100 Series single hung from a 1994 CBS home off McGregor Boulevard and found the interlock channel so UV-embrittled that the new sash would not seal. We cut back the stucco, installed a full-frame Mr-Glass 100 Series impact-rated unit with documented DP 50 rating, and passed the Lee County inspection that same week.
Mr-Glass Models & Products We Service in Fort Myers
We work on the Mr-Glass 100 Series Single Hung, the 300 Series Horizontal Roller, the 500 Series 3-Panel Sliding, and the 700 Series Casement, along with earlier Mr-Glass models still in Fort Myers homes from the pre-1992 code era. We install OEM Mr-Glass balances, rollers, and weatherstripping when replacement is needed. For out-of-production models, we use higher-durometer aftermarket seals and stainless hardware rated for coastal exposure. Our Fort Myers stock includes common Mr-Glass roller sizes and weatherseal profiles so we are not waiting on a shipment when your slider is off its track. We recommend full replacement only when the frame is warped, the DP rating is unknown, or multiple glass units have failed. Check our Fort Myers service area page for the neighborhoods we cover.
Mr-Glass Service Pricing in Fort Myers
Mr-Glass service pricing in Fort Myers depends on what we find when the window is pulled. A simple roller replacement on a 300 Series horizontal roller runs lower than a full 100 Series single hung replacement with impact-rated glass and a Lee County permit. We write line-item quotes before any work starts, and we will not add surprise charges to the bill. What drives cost here more than anything else is whether the existing Mr-Glass frame can carry a Florida Product Approval rating or requires full-frame replacement. Call (239) 323-5522 for a free estimate, and we will give you exact numbers for your specific model.
Serving Fort Myers, FL - Our Local Coverage Area
We’re based in the Fort Myers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mr-Glass Windows & Doors in Fort Myers
Because Hurricane Ian made direct landfall over Fort Myers as a Category 4, Lee County insurers now require documented Florida Product Approval design-pressure ratings on any replacement window, including Mr-Glass units. A quote without an FPA number gets rejected, and the policy may be repriced or dropped entirely. We provide the FPA documentation with every impact-rated Mr-Glass replacement we install. Call (239) 323-5522 for a quote that will satisfy your carrier.
Yes, if the frame is sound. Fogged glass on a Mr-Glass 300 Series horizontal roller is a failed insulated glass unit, and we can replace the IGU without pulling the entire frame. But if the frame was racked by Ian’s wind load or the DP rating is unknown, we will tell you before we order the glass. Call (239) 323-5522 and we will assess it honestly.
Mr-Glass vinyl single hung frames hold up better against Fort Myers salt air than aluminum frames, which corrode at the tracks and corners. The tradeoff is UV embrittlement: Fort Myers sun bleaches and hardens vinyl over two decades, especially on south and west exposures. We inspect your specific frames and tell you if they have another ten years or need full replacement.
It is usually both. Fort Myers storms drive grit and salt into the Mr-Glass 500 Series track, which scores the aluminum and grinds the rollers until the panel drags. We pull the panels, check the rollers, and rebuild or replace the track if the scoring is deep. Call (239) 323-5522 for a service appointment.
Not necessarily. We match frame profiles and sightlines where we can, and for Mr-Glass 100 Series single hungs on CBS ranches we often install impact-rated units that keep the existing look while meeting Lee County code. You will notice the difference in noise and temperature before you notice any change in appearance. Call (239) 323-5522 and we will bring samples to your door.
Service Areas Near Fort Myers
We serve the full Fort Myers service area, including Cape Coral, Lehigh Acres, North Fort Myers, Estero, and Bonita Springs. If you are across the river, see our Mr-Glass service in Cape Coral page, or if you are further east, Mr-Glass service in Lehigh Acres covers your area.
Book Your Mr-Glass Service in Fort Myers Today
If you have Mr-Glass windows or doors that need attention, call (239) 323-5522 for a free estimate. A live person answers the phone, day or night. We will arrive when we say, measure twice, and put every number in writing before we start.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Myers since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.









Before
After
Before
After
Before
After